GB
84
Sawing with
the branch support
In the case of smaller diameter branches,
use the branch support.
1. Turn the machine on. Before switch-
ing the appliance on, ensure it is not
in contact with the workpiece.
2. Place the branch support (13) onto
the workpiece.
3. Move the saw downwards by applying
light pressure.
Cleaning/Maintenance
Remove the battery from the
device before carrying out any
work or transporting it. If the de-
vice is switched on accidentally,
there is a danger of injury.
Repair and servicing work not
described in this manual should
always be carried by our Service
Centre. Use only original parts.
Always wear protective gloves
when handling the saw blade in
order to avoid cutting yourself.
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.
Cleaning
Do not spray the appliance with
water and do not immerse it in
water. Electric shock hazard!
• Keep clean the ventilation
slots (
4), motor housing and han-
dles of the appliance. Use a damp
cloth or a brush.
Do not use cleaning agents or sol-
vents. You may otherwise irreparably
damage the appliance.
• Clean the saw blade holder ( 16)
with a brush or by blowing out with
compressed air. To do this, remove
the saw blade from the device.
General maintenance
• Prior to every use, check the appli-
ance for obvious defects such as
loose, worn or damaged parts.
• Check covers and safety devices for
damages and correct installation. Re-
place as necessary.
• Replace a blunt or bent blade or one
which has been damaged in some
other way.
