Gartenland EasyMow 1200, Руководство пользователя

Страница: 36 / 83

en
Startup
36 Robotic lawn mower
Starting the robotic lawn mower
1. Switch on the robotic lawn mower by pressing
the [ON/OFF key].
2. Enter PIN code.
➯
After the PIN code has been entered, the
[Next mowing] information appears. The
robotic lawn mower is now ready for mo-
wing.
The robotic lawn mower starts automatically
when the next mowing window is reached.
Press the [START/PAUSE key] to start the
mowing procedure immediately.
➯
The [Warning drive starting] display flas-
hes and a signal sounds.
If the error message
1. Unplug the transformer.
2. Repair cable.
3. Transformer reconnect to the power grid.
Mowing
Mowing tips
Cutting height at a constant 3 - 6 cm, do not
mow off more than half of the lawn height.
Adjust the mowing times accordingly.
If the motor speed drops noticeably because
of thick grass, increase the cutting height and
mow in several passes.
ADVICE
To allow the performance of the robotic
lawn mower to be exploited to the full, we
recommend having the robotic lawn mo-
wer mow the lawn during cool times of
the day or at night.
DANGER!
Danger of injury due to the cutting bla-
des!
Before all maintenance and care
jobs, always switch off the automatic
lawnmower using the [ON/OFF key].
Disconnect the transformer of the
base station from the mains.
Always wear work gloves when per-
forming maintenance and care jobs
on rotating and/or cutting tools!
Setting the cutting height
Opening the cover
Pull item (2-6).
Setting the cutting height (10)
1 Open the lever up and turn it a quarter turn
clockwise in the direction of [lock symbol
opened].
➯
The cutting height adjustment is unlo-
cked.
2 Pull the lever upwards.
➯
Lawn cutting height is increased.
3 Push the lever downwards.
➯
Lawn cutting height is reduced.
4 Then turn the lever a quarter turn anticlock-
wise in the direction of [lock symbol closed]
and engage.
➯
Cutting height adjustment is locked.
5 Fold the lever down and close the cover (2-6).
ADVICE
The cutting height varies in the range
from 3 - 6 cm lawn height. It can be ad-
justed in five steps of 5 mm each.
Battery
The integrated battery is partially charged on
delivery. During normal operation, the battery
of the robotic lawn mower is regularly rechar-
ged.
When the battery charge reaches 0%, the ro-
botic lawn mower automatically returns to its
base station in order to charge the battery.
➯
Interrupting charging does not damage
the battery.
The base station is equipped with an elec-
tronic control unit with a monitoring function.
This automatically terminates the charging
procedure when a 100% charge status is re-
ached.
The battery status is shown on the display.
Make sure the charging contacts (10-1) of the
base station have adequate contact with the
contact surfaces (10-2) on the robotic lawn
mower.
The temperature range for charging should
be between 0 and 40 °C.
The built in protection circuit prevents the
battery from being charged at temperatures
above 45 °C, in order to prevent irreparable
damage to the battery.
If the operating time of the battery is reduced
in spite of it being fully charged, have the bat-
tery replaced by a new genuine battery. This
task should be carried out by a dealer, tech-
nician or service partner.