10
Mounting
Mounting
1. Hold the machine by the
carrying handle (8) and place
it carefully on the ground.
2. Lift up the Biker handle (15)
and lock the rods with the
fastening screws (14).
3. Remove the protection caps
from the axle mount the
wheels (13). Tighten the nuts
with the includes wrench.
Make sure the valves of the
wheels are facing outwards.
4. The cable is already fastened
on the Biker handle with
cable ties. If desired, use the included spare cable ties to fix the
cable on the Biker handle. By doing this, the cable cannot be
damaged if accidently jammed during operation.
5. Insert the self-locking nuts from
the top of the protective hood (4)
and hold the nuts in place with
one hand. Turn over the protec-
tive hood and mount the thread
cutter (3), as shown on the
protective hood. Use the hex
screws (M5 x 20 mm) and tighten
the screws with the includes key.
Fastening Screws
Protection Caps
Содержание GM BFF 52
Страница 1: ...Benzin Freischneider Fahrbar GM BFF 52 mit Biker Handgriff Artikel Nr 93 78 15 Originalanleitung...
Страница 3: ...III 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19...
Страница 31: ...Petrol Wheeled Brush Cutter GM BFF 52 with Biker Handle Article No 93 78 15 Original Instructions...
Страница 33: ...III 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19...
