ME
ME
ME
ME Series
Series
Series
Series Printer
Printer
Printer
Printer Operation
Operation
Operation
Operation Manual
Manual
Manual
Manual
- 51 -
Std_Mode
Lighten this item
,
press OK to confirm
.
The printer starts head clean
process automatically
.
The clean time is in normal
.
This mode is
chose for regular clean request
.
Light_Mode
Lighten this item and press OK to confirm
.
The printer starts head
clean process
.
The clean time is shorter in this mode
.
This is chose
for a tender clean while start printer in second day
.
Cap_Clean
Lighten this item
,
press OK to confirm
,
the carriage move left
.
Press
Down key to start sucking the waste ink from head capper by vacuum
generated by pump
.
The operator can add some solution into the
capper and let them sucked out
.
Put the solution again until the form
pad in the capper becomes clean
.
Press Up key again to stop
.
Press Exit key
,
the carriage will move to home position
,
the display
back to last Manu
.
Do this clean procedure every week
.
Capping
Lighten this item
,
press OK to confirm
,
the carriage moves right to
capping station
.
The capper will rise up to cover the head
.
Please
observe the rubber edge of copper touches the head surface well
,
there is no gap between the surface and rubber edge
.
It is must to do before switch off the printer
.
Otherwise the nozzle
of head would not be wet well and gets dried out and damaged
.
Press Exit key
,
the carriage will move to home position and standby
.
Param_Set
Wiper_Pos
Lighten this item
,
press OK to confirm
.
The wiper will turn to working
