
Introduction
This thermostat is compatible with electric baseboards, fan- forced (convectors) and radiant
floor/ceiling heating systems. The unit is rated for high voltage wiring only (120V / 240V).
The minimum load requirement is 500W. This thermostat is NOT compatible with central heating
systems (24 volt or millivolt). Please see the compatibility chart on the next page for more details.
Warning
IT IS STRONGLY RECOMMENDED TO HAVE A CERTIFIED ELECTRICIAN
ON SITE TO ENSURE THE SAFE INSTALLATION OF YOUR THERMOSTAT.
The manufacturer assumes no responsibility for improper wiring, or any resulting damages.
Improper installation by a non-professional automatically voids the warranty.
Installation Guide
3
Final Size: 5” x 3” / 12.5cm x 7.5cm