First select the weekday you wish to program, then
select the start times and temperature settings for
all four program periods. Scroll through the daily
Program Periods in this order P1, P2, P3, P4.
You may select any weekday to begin programming:
Press PROG to enter program setting mode.
Press HOLD/DAY to change weekday being programmed. (Period 1 (P1) will appear.)
Press UP or DOWN to set the temperature for P1. (The temperature digits will flash)
Press USAGE / TIME to switch to the start time mode. (start time will flash)
Press UP or DOWN to set the start time for P1. (The time will flash)
Note: USAGE/TIME will toggle between the temperature and start time modes.
Press PROG again to adjust the next Program Periods P2, P3, P4. Repeat the above steps
above until all four programs are adjusted to your needs. Then program the rest of the week,
either by programming each day individually or by using the COPY function.
2
1
3
4
5
6
Set Program
COPY FUNCTION - After one day is programmed, you may copy all 4 of that day’s program
settings to any other weekday using the COPY program function. (see next section)
16
P2
P3
P4
P1
MO TU WETH FR SA SU
PM
SET
START
TIME
PROGRAM
PERIODS
TEMPERATURE
SETTING
WEEKDAYS
CLOCK
SYMBOL
Final Size: 5” x 3” / 12.5cm x 7.5cm
