Garrison 043-5488-8, Руководство пользователя

Страница: 12 / 26

HOW TO INSTALL
NOTE: Top rail and Sliding Panels at each side are offset to provide the proper pitch to the rear of
5/16 . This is
the window sill will be facing into the room.
necessary for proper condensed water utilization and drainage. If you are
not using the Side Panels for any reason, this pitch to the rear must be maintained.
,,
1
Fig. 1
A. Hold the Accordion Panel
in one hand and gently
cabinet as shown in Fig. 2A, 2B & 3. Slide the
panel down. Be sure to leave enough space to slip the
top and bottom of the frame into the rails on the cabinet.
11
C. Once the panel has been installed on the side of the
cabinet, make sure it sits securely inside the frame
channel by making slight adjustments. Slide the top
and bottom ends of the frame into the top and bottom
rails of
D. Slide the panel all the way in and repeat on the other
side.
to use the proper panel for each side. When installed insert comma the flange for securing the panel
in place to
Fig. 2A
Fig. 2B
pull back the centre to free
the open end. See Fig. 1.
Fig. 3
B. Slide the free end of the panel
into the
the cabinet. Fig. 4.
NOTE: If storm window blocks AC, see Fig. 13.
Place unit on floor, a bench or a table. There is a Left and Right Window Filler Panel - be sure
,
(I section)
Fig. 4