M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Command
Description
set-qi interval=<value>
The IGMP querier router periodically sends
general host-query messages. These messages are
sent to ask for group membership information.
This is sent to the all-system multicast group
address,
224.0.0.1
. The default value is
125 seconds. The valid range can be from 60 to
127 seconds.
set qos type=<port|tag|tos|none>
port=<port|list|range>
[priority=<high|low>] [tos=<0-
63|list|range>][tag=<0-7|list|range>]
depending on the type of QOS, the
corresponding field has to be set. For example, for
QOS type tag, the tag levels have to be set, and
for QOS type ToS, the ToS levels have to be set.
If the priority field is not set, it then defaults to
low priority. ToS has 64 levels and the valid
values are 0-63 and a tagged packet has 8 levels
and the valid values are 0-7.
set-qri interval=<value>
The query response interval is the maximum
amount of time that can elapse between when the
querier router sends a host-query message and
when it receives a response from a host. The
Default value is 10 seconds. The Range can be
from 2 to 270 seconds. Restrictions apply to the
maximum value because of an internal
calculation that is dependent on the value of the
Query Interval.
set-querier <enable|disable>
enables or disables a switch as IGMP querier
setsntp server = <ipaddress> timeout =
<1-10> retry = <1-3>
setup the SNTP server
290
