GarrettCom Magnum CSG14, Инструкция по установке и эксплуатации

Страница: 67 / 77

CSG14 Series Gigabit Converter Switch Installation and User Guide (05/08)
59
www GarrettCom com . .
connecting the CSG14’s to other unmanaged switches, legacy hubs, managed switches,
media-converters etc. Please note that there can be conditions with managed switches
where the switch manager fixes the port settings via software, and the result of the auto-
negotiation is changed in the managed switch by the manager commands. In such cases,
the 10/100/1000 speed or the F/H mode may be affected, but auto-cross in the CSG14
Switches will still work. The auto cross function cannot be disabled.
When an RJ-45 cable connection is made, and each time LINK is enabled,
auto-negotiation takes place (except for legacy products, which do not have auto-
negotiation and which go to the default state accordingly). The Magnum Switch
advertises its capability for 10, 100 or 1000Mbps speed and F/H duplex mode, and the
device at the other end of the cable should similarly advertise / respond. Both sides will
agree to the speed and mode to be used per the IEEE 802.3z standard. Depending upon