GarrettCom Magnum 4K24F Скачать руководство пользователя страница 35

Страница: 35 / 45

Magnum 4K24 Switches Installation and User Guide (10/04)

www GarrettCom com

5.2.1

FKM-MST, 100Mbps multi-mode FX-ST-type, “twist-lock”

connector

The Magnum FKM-MST is a multi-

mode 100Mbps fiber optic module equipped

with a dual ST-type connector. It functions as a

fiber optics transceiver to support 100BASE-FX

network segments. When installed in a Magnum

4K24 Full-duplex Switch, it supports fiber optic

cable distances up to the IEEE-specified switch distance limits, i.e., typically 2000

meters.

5.2.2

FKM-MSC 100Mbps multi-mode FX-SC-type, “snap-in”

connector

The Magnum FKM-MSC is also a multi-mode 100Mbps fiber optic transceiver

module, similar to the FKM-MST.

While the functionality of the these

two modules is the same, the FKM-MSC is

equipped with an SC-type "snap-in"

connector instead of an ST-type.

5.2.3

FKM-SSC and –SSCL 100Mbps single-mode FX-SC-type, “snap-

in”

The Magnum FKM-SSC (and –SSCL) is a single-mode 100Mbps fiber optic

module equipped with a dual SC-type connector. It functions as a full fiber optic

transceiver to support single-mode fiber networks.

To distinguish the single-mode FPM-SSC from the multi-mode FKM-MSC, the

label “Sgl. M.” is at the top of the faceplate of the FKM-SSC.

5.2.4

FKM-MTRJ, 100Mb multi-mode FX, MTRJ small-form-factor

connector

Magnum FKM-MTRJ is a

multi-mode fiber optic module equipped

with a small-form-factor MTRJ-type

connector. It looks almost like an RJ-45

port, but it is black plastic in color. The

100BASE-FX,

FKM-2ST Connectors

100BASE-FX,

FKM-2SC Connectors

100BASE-FX, Small Form Factor

FKM-2MTRJ Connectors

Содержание Magnum 4K24F














































Результаты поиска

Содержание Magnum 4K24F

Отзывы:

Похожие инструкции для Magnum 4K24F

Бренды по названию

Популярные бренды

GarrettCom Magnum 4K24F, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Magnum 4K24F

Отзывы:

Похожие инструкции для Magnum 4K24F

Бренды по названию

Популярные бренды