Garrett GTI 1500 Скачать руководство пользователя страница 55

Страница: 55 / 88

Last Mode

Use of this touch pad can be particularly

helpful while scanning because it effec-

tively converts your GTI 1500 into an

instantaneous dual, or triple-mode detec-

tor. Pressing and releasing this touch

pad returns detector operations to the

mode that has just previously been used.

Thus, it is easy to alternate between any

two operating modes, such as Coins and

Zero or Custom. Pressing the TREASURE

IMAGING touch pad, then, provides a

third, all-metal mode.

More On Target Audio

It is important to remember that the GTI's

audio causes weaker targets to be detect-

ed with shorter "beeps" and stronger tar-

gets to be detected with longer “beeps.”

When a metallic object is accepted, the

detector will, of course, “beep”. Some

rejected targets, however, may cause

audio to “break Up” or sound erratic. This

is generally a response to shallow, trash

targets and can be remedied by rais-

ing the height of your searchcoil slightly

when scanning (always keeping it level).

Graphic Target Imaging 1500 - 55

Содержание GTI 1500
























































































Результаты поиска

Содержание GTI 1500

Отзывы:

Garrett GTI 1500, Руководство пользователя, Страница: 55 / 88

Результаты поиска

Содержание GTI 1500

Отзывы: