Garrett GTI 1500 Скачать руководство пользователя страница 36

Страница: 36 / 88

is necessary at factory settings. To turn

off this function use MENU to display the

word, press - and the word will begin

blinking. Pr will turn it back on.

Backlight

This function of the GTI 1500 lights the

control panel so that the detector can

be used at night or in dark places. The

Backlight will turn on automatically when-

ever the unit is in the MENU mode and will

turn itself off when you leave this mode

unless you have activated the function, as

described below.

If you wish to turn on the Backlight aid,

use the MENU to display Backlight and

press + when the word is blinking to turn

it on. Press - to turn off the function and

cause the word to blink.

To maximize battery life it is recommended

that you make certain that the Backlight

is turned off whenever it is not needed.

Additional Settings Information

All of the personal preference adjust-

ments you have just set in the GTI 1500

6 - Garrett Metal Detectors

Содержание GTI 1500
























































































Результаты поиска

Содержание GTI 1500

Отзывы:

Garrett GTI 1500, Руководство пользователя, Страница: 36 / 88

Результаты поиска

Содержание GTI 1500

Отзывы: