Garrecht Avionik GmbH
VT-01 Transponder
User manual
Dokument 01.0200.10E
Revision: 1.3
11
13.02.07
3.2.2. multiple profiles (optional function)
The VT-01 offers a multiple profile feature optionally. Profiles allow to store five
different sets of aircraft specific data, such as Mode-S Adress, Flight ID and other
settings related to the aircraft. When moving the transponder to another aircraft
(especially in the ballons), you can easily select the appropriate configuration for this
aircraft, if entered before. Refer to the installation manual to learn more about setting
up the profiles.
In the standard configuration, only one profile is provided. The multiple profiles
function needs to be purchased by the manufacturer or it's representative.
How to select an entered profile:
•
Set unit to standby (SBY) mode
•
Enter the profile setup by simultaneously pressing key 1 (power-on/off) and
the push button of the rotary encoder.
•
The LCD now shows password. Press the inner knob of the double shaft
rotary encoder to invoke the edit mode.
•
Enter the following password:
080000
using the rotary encoder. Rotate the
inner knob of the double shaft rotary encoder to modify the selected value.
Use the outer knob of the double shaft rotary encoder to select the desired
position in the string .
•
After
entering
the
password
above,
the
system
LCD
shows:
•
Now, use the outer knob of the double shaft rotary encoder to select the menu
aircraft data. Then, press the inner knob of the double shaft rotary encoder.
The system shows:
•
Now, press the inner knob of the encoder again and select the desired profile
by rotating the inner knob.
•
If a profile has been selected, rotate the outer knob of the double shaft rotary
encoder to show the stored data (Mode-S address, Flight ID, max. speed,
auto-gnd settings, alticoder source, alticoder resolution).
Modifications are not possible in this menu, except the Flight ID. For entering the
data shown above, please refer to the installation manual.
NOTE:
If you have not purchased for the multiple profiles feature, the
system offers one profile only. Selecting another profile than
profile-1 is not possible.
Password
accepted
profile
profile-1
