GARO Wallbox GLB+, Инструкция по сборке/Инструкция по использованию

Страница: 9 / 19

16 17
EN EN
Assembly instructions for installer /
Tools and material required
Assembly instructions for installer /
Box Contents
EN
GARO Wallbox
Assembly instructions/User Instructions (EN)
380175-3
Language labels
GLB Wallbox
Keys
Drill template
(see the back of the box)
Manual
Before installing the Garo Wallbox, gather the folllowing tools and materials:
• Pencil or marker
• Hole punch (optional, to push through cardboard template)
• Wire cutter
• Voltmeter or digital multimeter (to measure AC voltage at the installation site)
• Small flathead screwdriver
• Medium flathead screwdriver
• Large flathead screwdriver (optional, to remove plastic knock-outs on back panel of
GLB+ Wallbox)
• T20 Torx driver
• 3 screws (and plugs) suitable for wall type
• Ferrules (the diameter of the ferrule depends on the diameter of the power wiring and
the construction)
• Level
• Power drill
• Cable gland for communication cable (Optional only when knock-outs on back
panel of GLB+ Wallbox is used)
Tools and Materials Required Box Contents