GARO Wallbox GLB+, Инструкция по сборке/Инструкция по использованию

Страница: 17 / 19

32 33
EN EN
End user instruction/
Care
We recommend cleaning the GLB+ Wallbox with a soft dry cloth. Never use abrasive
pads or detergents.
Care
Cleaning the Charging Station
Do not install or use the GLB+ Wallbox near flammable, explosive, harsh, or
combustible materials, chemicals, or vapors.
Turn off input power at the circuit breaker before installing, configuring or
cleaning of the GLB+ Wallbox.
Never spray water or any other liquid directly at the GLB+ Wallbox. Never spray
any liquid onto the charge handle or submerge the charge handle in liquid. Store
the charge handle in the dock to prevent unnecessary exposure to contamination
or moisture.
Do not use cleaning solvents to clean any of the GLB+ Wallbox’s components.
The outside of the GLB+ Wallbox, the charging cable, and the end of the
charging cable should be periodically wiped with a clean, dry cloth to remove
accumulation of dirt and dust.
Avoid mounting the wall box in direct sunlight. The charging current
will be reduced to 16A if the temperature limit inside the wallbox is
exceeded. Charging can also be completely turned off should the
wallbox be too hot, this is a safety feature to ensure a long life-time of
the product.
End user instruction /
Troubleshooting
Troubleshooting
Indication Type of fault Measure
Constant red light The residual-current or
personal protective current
breaker
has been tripped. Reset. Refer to section on
Resetting the residual-current
or personal protective current
breaker.
Broken cable Check cable
Motor lock socket not in
latched position. Contact a qualified
electrician.
Other Contact a qualified
electrician.
No indication Check supply fuse.
If the advise does not help, contact your qualified installer.