GARO Wallbox GLB Series, Инструкция по сборке / Инструкция для пользователя

Страница: 28 / 48

EN
28
Installation Instructions
Commissioning:
• Connect Data Link to GLB Modbus terminal “Data Link” (refer to Mainboard simplified connection
diagram) Note, Modbus connection between GLB Wallboxes must be connected as following: A-
to A- and B+ to B+ see (figure 27) (figure 28).
• Config SW1 (DIP 5-6) see (figure 27) (figure 28).
If you want to use LAN-cable to access the GLB-Wallbox web-interface, you can install a LAN cable to
the RJ45 port on the communication card.
The GLB-Wallbox RJ45 port settings is DHCP as default.
RFID settings, see section web interface in this manual
LAN connection via RJ45 port on communication card (only for
GLB-Wallbox with communication card installed)