USER MANUAL
USER MANUAL
Normal use / Charging
Connect the charging cable to the EV. Charging will start
immediately if the EV is ready for charging. See your EV charging
manual.
When finishing charging, follow the car’s instructions.
After charging: Release the charging cable from your EV and
place the charging cable at designated place.
Note!
It is the EV that determines how much electrical current (A) the GTB
should provide. GTB Twinbox can provide the maximum rated
power according to the rating label. When both sides are in use,
the GTB Twinbox will balance the load equally between both
sides.
In cases where the required power exceeds the available power
to the Twinbox, the left hand side is prioritized. The electrical
current can also be reduced by the Dynamic Load Management
(DLM) functions.
If the GTB Twinbox is equipped with outlets, it is important to use
correct charging cable.
For example, if you want to use 32A from the Twinbox, you must
use a 32A charging cable.
Basic LED indications
Firmware GTB Twinbox
Service / Maintenance
Troubleshooting / Support / FAQ mm
See User manual at www.garoemobility.com/support
See User manual at www.garoemobility.com/support
See User manual at www.garoemobility.com/support
Solid green light: ready for charging
Flashing green light: GTB Twinbox waiting for
start signal from electric vehicle
Shifting blue light intensity: charging
Other LED indications: see User manual at
www.garoemobility.com/support
9
EN
