GARO ENTITY PRO, Установка и эксплуатация

Страница: 21 / 91

4.9 TO DECIDE INTERNET CONNECTION TYPE
•
Decide what internet connection should be used for
the installation. There are 3 types of internet
connection that is possible to use for installation.
1. Ethernet cable from the router/switch.
2. Local Wi-Fi connection from the building where
the installation is set up.
3. Built-in 4 G/LTE with SIM card.
NOTE
The listed order is also the automatic priority order for
connection types.
•
If several charging stations are interconnected to
form a connection group, internet should be
connected to the master charging station.
4.10 TO CONNECT SEVERAL CHARGING
STATIONS
NOTE
If DLM is used, all charging stations must be on the same
network.
Before choosing the connection type between several
charging stations, first chose the internet connection
type for the master charging station (must!). Refer to 4.9
To decide internet connection type, page 21 .
The system is equipped with a built-in meshed Wi-Fi
system that contributes to an easy installation. However,
large distances or obstacles may require physical
ethernet cable connections.
NOTE
A connection group is limited to max. 32 units. If more
units needs to be used in the system, then subgroups
needs to be introduced.
NOTE
The master unit is the bridge between a mesh Wi-Fi and
ethernet. It is not possible to switch between mesh Wi-Fi
and ethernet without introducing a master/new
connection group where media needs to be changed
(from ethernet to mesh Wi-Fi and vice versa). Each
internet connection type must be set up through the
master unit.
4.10.1 BEFORE SETUP
Before deciding the connection type between several
charging stations (CS), decide the internet connection
type for the master CS. Refer to 4.9 To decide internet
connection type, page 21 .
The system is equipped with a built-in meshed Wi-Fi
system that contributes to an easy installation. However,
large distances or radio obstacles may require physical
ethernet cable connections. Cable connection is a good
recommendation, but comes with pros and cons. The
first charging station unit must be setup as a master unit.
Other charging station units can be connected to the
master unit using mesh Wi-Fi, ethernet cable or both.
WWW
21
Installation