Garner HD-2 Series, Руководство по эксплуатации, Страница: 3 / 6

3 of 6
HD-2 SERIES Operation Manual
LCD DISPLAY ERROR CODES
Charge Error:
The LCD screen displays “Charge Error”. This error indicates that the
degausser failed to charge to the determined power level necessary to
successfully erase the media in the degaussing chamber.
Action:
Turn off the degausser for one minute and restart. (Turning off the power
to the degausser will clear the error.) If the error repeats, have the power
mains checked and also check the degausser to make sure the power
setting is set to match the power mains. If error persists, call customer
support.
Drawer Open Error:
The LCD displays “Drawer Open”. This error indicates that the Media
Drawer is not completely closed. The degausser continuously checks to
see if the Media Drawer is closed. If the drawer is not closed, the “Drawer
Open” will persist on the LCD. Once the drawer is closed, the degausser will
automatically continue the erase function.
Action:
Check to see that drawer is seated in detent.
Gauss Error:
The LCD displays “Gauss Error”. This error indicates the erasing field may
not have been adequate to effectively erase the media in the degaussing
chamber.
Action:
Turn off the degausser for approximately one minute. Turning off the power
to the HD-2X and HD-2SS will clear the error. Turn the degausser back on.
To initiate the degauss cycle with media already in the media drawer, open
the media drawer and close it. The media in the degaussing chamber will be
erased if the field is sufficient otherwise the “Gauss Error” will persist on the
LCD screen. If error persists, call customer support.
Overheat Error:
LCD displays “Overheat”. This error indicates the internal temperature has
risen to a level that may be harmful to the degausser.
Action:
When the degausser indicates an overheat error, it will inhibit any further
operation until the degausser returns to an acceptable temperature. Leave
the degausser powered on as the chassis fan will help reduce the heat
inside the degausser. When the temperature is low enough, the degausser
will return to normal operation. If this error persists, call customer support.
MAGNETIC FIELDS
Magnetic Fields Measured Around Perimeter
The
HD-2X and HD-2SS
produces a single focused magnetic pulse
lasting less than 1/20 of a second. The focused intensity allows the
unit to erase today’s highest coercivity media while also limiting the
magnetic field exposure to 1 second for every 20 pieces of media
degaussed.
Distance from
degausser
Magnetic field
(Front Panel)
Magnetic field
(Side)
Duration of
Field
HD-2X HD-2SS HD-2X HD-2SS
0 mm (0 in.)
710
gauss
620
gauss
458
gauss
328
gauss
< 0.05 Second
100 mm (4 in.)
167
gauss
249
gauss
99
gauss
81
gauss
< 0.05 Second
200 mm (8 in.)
68
gauss
85
gauss
52
gauss
26
gauss
< 0.05 Second
300 mm (12 in.)
40
gauss
19
gauss
44
gauss
8 gauss < 0.05 Second
Note: The testing room measured 0.4 gauss before degausser was
plugged in.
Average Operational Distance (AOD) from user to the degausser is
12-18 inches (300-450 mm). According to the American Conference
of Governmental Industrial Hygienists (ACGIH) Threshold Limit
Values (2005) - Static Magnetic Fields, whole body exposure limits
recommended for an 8 hour shift are 600 gauss. Because of the short
duration of each pulse from a degausser (1/20
th
* of a second) and the
extremely small magnetic field outside of the unit (<19 gauss, AOD) the
total 8 hour whole body exposure is 1/120th of the recommended limit.
*Pulse duration was rounded to ½ second per discharge for calculations to
cover any build up of magnetic fields generated before or after discharge.
DISPOSAL
Disposing of the machine:
Dispose of the machine in an environmentally sound fashion at
the end of its useful service life. Do not dispose of any of the
parts included in the machine or its packaging with household
trash.
SPECIFICATIONS
Part Numbers HD-2X, HD-2SS
Certifications/Listings CE • ANSI • FCC
Power Supply 100~240VAC ±5%, 50/60 Hz- Factory configurable
Power Consumption During standby: 24W
During charge: 156W (avg)
At the time of erase: 60W
Media Hard drives: Laptop, standard, network up to 1.5 in. (1.25 in.
for HD-2X) in height
Tape media: All LTO, all DLT, AIT, 2590 Series, 8mm, and
others
Erasing time Erases up to 480 (1.8 in.) hard drives per hour
Erases up to 360 (2.5 in.) hard drives per hour
Erases up to 60 (3.5 in.) hard drives per hour
Cycle time 60 seconds per cycle.
Degausser System Capacitive Discharge
Operating Duty Cycle Continuous
Magnetic Field HD-2X: >10,000 Gauss / >1 Tesla
HD-2SS: 8,800 Gauss / 0.88 Tesla
Drawer Capacity HD-2X: 1.3 x 4.3 x 5.9 (in.) 33 x 109 x 149.9 (mm)
HD-2SS: 1.5 x 4.3 x 5.9 (in.) 38.1 x 109 x 149.9 (mm)
Temperature 5°C - 40°C (41°F - 104°F)
Humidity 10%H - 40%H (without condensation)
Weight HD-2X: 37 lbs. (16.8 kg)
HD-2SS: 36 lbs. (16.34 kg)
Dimensions
(HxWxD)
HD-2X: 6 x 17.8 x 13.3 in. (151 x 451 x 338 mm)
HD-2SS: 17.9 x 5.2 x 13.3 in. (454 x 132 x 339 mm)
Warranty 1 Year Factory Warranty Standard, Optional 3 Year Factory
Warranty available.
Made In U.S.A.