Garmin Volvo Penta Glass Cockpit B12, Руководство пользователя

Страница: 76 / 106

Playing Music
Browsing for Music
1
From the media screen, select Browse or Menu >
Browse .
2 Select Select or select an option.
Enabling Alphabetical Search
You can enable the alphabetical search feature to find a
song or album in a large list.
From the media screen, select Menu > Installation >
Alpha Search .
Setting a Song to Repeat
1
While playing a song, select Menu > Repeat .
2 If necessary, select Single .
Setting All Songs to Repeat
From the media screen, select Menu > Repeat > All .
Setting Songs to Shuffle
1
From the media screen, select Menu > Shuffle .
2 If necessary, select an option.
Joining the Fusion PartyBus ™ Network
You can play music from other compatible stereos
connected to the Fusion PartyBus network. One Fusion
PartyBus stereo must be connected to the chartplotter
using the NMEA 2000 network.
NOTE: A Fusion PartyBus zone stereo, such as the
Apollo
™
SRX400 zone stereo, cannot stream sources to
other Fusion PartyBus devices on the network. Because
of this, zone stereos do not appear as available sources
in the chartplotter.
1 From the media screen, select Source .
NOTE: After few moments, the compatible Fusion
PartyBus stereos appear as sources.
2 Select the Fusion PartyBus stereo.
3 If necessary, select Source , and select a different
source connected to the Fusion PartyBus stereo.
To leave the Fusion PartyBus network, you can select
Source > Leave PartyBus .
Adjusting the Volume
Muting the Media Volume
1
From the media screen, select .
2 If necessary, select Select .
Enabling and Disabling Zones
If you have wired your vessel's speakers into zones, you
can enable needed zones and disable unused zones.
1 From the media screen, select Menu > Audio Levels
> Enable/Disable Zones .
2 Select a zone.
VHF Radio
NOTE: These features are available on some stereos with
a VHF receiver.
Scanning VHF Channels
Before you can scan VHF channels, you must set the
source to VHF.
You can monitor VHF channels saved as presets for
activity and automatically switch to an active channel.
From the VHF media screen, select Scan .
Adjusting the VHF Squelch
NOTE:
This feature is available on some stereos with a
VHF receiver.
1 From the VHF source page, select Menu > Squelch .
2 Use the slider bar to adjust the VHF squelch.
Radio
To listen to AM or FM radio, you must have a suitable
marine AM/FM antenna properly connected to the stereo
and be within range of a broadcasting station. For
instructions on connecting an AM/FM antenna, see the
stereo installation instructions.
To listen to SiriusXM
® radio, you must have the
appropriate equipment and subscriptions ( SiriusXM
Satellite Radio , page 65 ). For instructions on connecting
a SiriusXM Connect Vehicle Tuner, see the stereo
installation instructions.
To listen to DAB stations, you must have the appropriate
equipment (
DAB Playback , page 65 ). For instructions on
connecting a DAB adapter and antenna, see the
installation instructions provided with your adapter and
antenna.
Setting the Tuner Region
1
From the media screen, select Menu > Installation >
Tuner Region .
2 Select an option.
Changing the Radio Station
1
From the media screen, select an applicable source,
such as
FM .
2 Select or to tune to a station.
Changing the Tuning Mode
You can change how you select a station for some media
types, such as FM or AM radio.
NOTE: Not all tuning modes are available for all media
sources.
1 From the media screen, select Menu > Tuning Mode .
2 Select an option.
3 If necessary, select Select .
Presets
You can save your favorite AM stations and FM stations
as presets for easy access.
You can save your favorite SiriusXM channels if the
stereo is connected to an optional SiriusXM tuner and
antenna.
You can save your favorite DAB stations if the stereo is
connected to the proper DAB equipment and set to the
correct tuner region. (
DAB Playback , page 65 )
64 Media Player