Garmin VIRB Ultra 30, Быстрый старт

Страница: 6 / 311

VIRB® ULTRA 30 5
EN
Desiccant packs are harmful if swallowed by an infant or
pet due to choking hazard.
You should install an anti-fog desiccant pack for optimal
performance and fog resistance.
1 Open the camera case.
2 Insert the desiccant pack 1 between the camera and
the case.
3 Close and latch the camera case.
If the desiccant pack becomes saturated, you can heat
the desiccant pack at 85°C (185°F) for 60 minutes to dry
the desiccant pack for reuse.
Attaching the Device to the Mount
NOTICE
To prevent product loss or damage, do not use the
adhesive mounting base when the temperature is below
-15°C (5°F).
The permanent mounting adhesive is extremely difficult
to remove after it is installed.
Before you can install the adhesive mounting base onto
a surface, the ambient temperature must be from 21° to
38°C (from 70° to 100°F).
Your device includes an assortment of mounting bases
and arms, which can be used in many configurations.
These instructions provide an example of one possible
configuration. You can also purchase additional mounts
for your device, such as wearable mounts, vehicle
mounts, or a tripod mount. Go to
Garmin.com/VIRB for
more information.
1 Thoroughly clean and dry the mounting surface using
water or alcohol.
The mounting surface must be free of dirt, debris,
VIRB ULTRA APAC-八國 [142x86mm]-15.indd 5 2016/8/9 上午 10:42:01