Garmin VIRB Ultra 30, Быстрый старт

Страница: 33 / 311

32 VIRB® ULTRA 30
EN
control feature for one camera or for your main camera.
If you have multiple cameras, you should follow the
instructions for controlling multiple cameras remotely
(Controlling Multiple Cameras Using ANT+ Wireless
Technology, page 32)
.
1 On your camera, from the main menu, select Wireless
> Remote > Status to turn on remote operation.
2 Select No .
The remote control settings appear, with the camera
set as the main VIRB camera.
3 Select an option:
• On the ANT+ device, launch the VIRB app or
feature. See the owner’s manual for the device for
more information.
• On the VIRB remote, follow the pairing instructions
in the accessory manual.
Enabling the Remote Wake Up Feature
The Remote Wake Up feature enables your camera to
remain in a low-power state instead of turning off. This
allows your remote control device to wake the camera
to start recording or take a photo.
NOTE : This feature consumes some battery power when
the camera is off. To avoid draining the battery, you
should disable this feature when you are not using the
camera, or when you store the camera overnight or for a
longer time period.
Select Wireless > Remote > Remote Wake Up .
When you turn off the camera, it enters remote
wake-up mode. The status LED flashes blue intermit-
tently while the camera is in remote wake-up mode.
Controlling Multiple Cameras Using ANT+
Wireless Technology
When controlling multiple cameras using ANT+ wireless
technology, you must choose a main VIRB camera. This
camera controls all of your other cameras.
When you use an ANT+ device to control multiple cam-
eras, the ANT+ device controls only the main VIRB cam-
era. The main VIRB camera passes commands received
from the ANT+ device to the extended cameras.
1 Bring all your VIRB cameras within 3 m (10 ft.).
2 On your main camera, from the main menu, select
Wireless > Remote > Status to turn on remote opera-
VIRB ULTRA APAC-八國 [142x86mm]-15.indd 32 2016/8/9 上午 10:42:03