Garmin VIEO RV 1052, Быстрый старт

Страница: 4 / 68

Dock Overview
Magnetic dock for the Vieo ™ RV 852/1052 display. Charges the display and
sets the display user interface to docked mode.
Power. Select to enable standby mode. Hold to turn the system on or off.
Volume up
Volume down
Mute
• Select to skip to the previous or next track, when using an applicable
source.
• Hold to rewind or fast forward the current track, when using an applicable
source.
• AM or FM source:
◦ Select to tune to the previous or next station.
◦ Hold for faster tuning (manual mode only).
• Aux 1 or Aux 2 source: Select to decrease or increase the gain for the
connected source.
• DAB source: Select to change to the previous or next DAB station in the
ensemble.
• Select to pause or resume.
• AM or FM source:
◦ Select to move through the tuning modes: auto, manual, and presets
(when two or more presets are saved).
◦ Hold to save this station as a preset.
• DAB source: Select to scan for DAB stations.
Select to change the audio source.
Docking the Display
The display provides a touchscreen interface for the infotainment system. It
can control the system while docked or undocked.
1 Place the bottom edge of the display into the dock.
2 Tilt the top of the display toward the dock until the magnets pull the remote
into the correct position.
The dock charges the display. in the status bar indicates the battery charge
level.
Undocking the Display
1 Tilt the display toward you by pressing the bottom edge of the display
inward while pulling the top edge of the display toward you.
This method keeps the bottom of the display seated in the dock and helps
to prevent dropping the display.
2 After the display releases from the magnet, carefully remove the display
from the mount.
Home Screen
NOTE: The home screen layout may vary if it has been customized.
4 Quick Start Manual
EN