background image

NOTE: 

The device disables DSC automatically when you turn 

on ATIS (

Automatic Transmitter Identification System

page 9

).

Entering Your MMSI Number

NOTICE

You can enter your MMSI number only once. If you must change 

your MMSI number after entering it, you must take your radio to 

your Garmin

®

 dealer for reprogramming.

The Mobile Marine Safety Identity (MMSI) number is a nine-digit 

code that acts as a DSC self-identification number, and it is 

required to use the DSC capabilities of your radio. You can 

obtain an MMSI number from the telecommunications authority 

or ship registry for your country. In the USA, you can obtain an 

MMSI number from these sources:
• Federal Communications Commission (FCC): assignments 

are recognized internationally

• BoatU.S.

®

, Sea Tow

®

, or United States Power Squadrons

®

assignments are for USA waters only.

1

Select 

MENU

 > 

DSC

 > 

MY MMSI

.

2

Enter your MMSI number (

Entering Text

, page 4

).

3

Select 

ACCEPT

.

The radio prompts you to confirm your identity.

4

Enter your MMSI number again, and select 

ACCEPT

.

If the MMSI numbers you entered do not match, a message 

appears.

5

If necessary, select 

RETRY

, and enter the number again.

Viewing Your MMSI Number

Select 

MENU

 > 

DSC

 > 

MY MMSI

.

Distress Calls

When you make a distress call, your call is transmitted to all 

DSC-capable radios within receiving range. Your current GPS 

position (latitude and longitude) and the current time are 

included in the transmission if you have a GPS device 

connected to your transceiver. If you manually entered your 

position information with the time, that data is transmitted with 

the call.

NOTE: 

You should familiarize yourself with the standard 

distress-call format and protocol to ensure your calls are clear 

and effective.

Sending an Undesignated Distress Call

When you send an undesignated distress call, the nature of your 

emergency is not transmitted to the receiving stations. Sending 

an undesignated distress call is a faster procedure that can save 

you time during an emergency.

1

Lift the spring-loaded door, and hold 

DISTRESS

 for at least 3 

seconds.
The radio beeps and counts down the seconds. DISTRESS 

CALL COUNTING DOWN appears on the screen.
The radio sounds an alarm, switches to channel 70, and 

transmits your call on high (25 W) power.

2

Press any key to silence the alarm sound.
The radio tunes to channel 16 on high (25 W) power.

3

Select 

PTT

 on the handset or radio to relay your distress 

message.
The radio waits for an acknowledgment (ACK) on channel 70 

from a listening station.

Sending a Designated Distress Call

When you send a designated distress call, the nature of your 

emergency is transmitted to the receiving stations.

1

Lift the spring-loaded door, and press 

DISTRESS

.

2

Turn the 

SELECT

 dial, and select the type of distress call.

TIP: 

You can select CLEAR to exit the screen without 

sending a distress call.

3

Hold 

DISTRESS

 for at least three seconds.

The radio beeps and counts down the seconds. DISTRESS 

CALL COUNTING DOWN appears on the screen.
The radio sounds an alarm, switches to channel 70, and 

transmits your call on high (25 W) power.

4

Press any key to silence the alarm sound.
The radio tunes to channel 16 on high (25 W) power.

5

Select 

PTT

 on the handset or radio to relay your message.

The radio waits for an acknowledgment (ACK) on channel 70 

from a listening station.

Waiting For and Receiving and Acknowledgment for a 

Distress Call

If the radio does not receive an acknowledgment for a distress 

call, the radio retransmits the distress call randomly between 3.5 

to 4.5 minutes later, and continues to retransmit the distress call 

at random intervals until the radio receives an acknowledgment.
When the radio receives the acknowledgment, it begins beeping 

and DISTRSS ACK appears on the screen.

1

Press any key to turn off the beeping.

2

Select   to view additional information.

TIP: 

If the MMSI of the station transmitting the 

acknowledgment signal is an entry in your directory, the 

name associated with the MMSI number appears on the 

screen. If the MMSI of the station is not in your directory, the 

MMSI number appears on the screen.

3

Select 

ACCEPT

.

Stopping Automatic Retransmission of Distress Calls

Select 

CANCEL

.

The radio remains tuned to channel 16.

NOTE: 

Selecting CANCEL ends the automatic repetition of 

the call, but does not communicate to other stations that you 

no longer have an emergency. If you no longer have an 

emergency, you should revoke the distress call (

Revoking a 

Distress Call

, page 5

).

Revoking a Distress Call

You do not transmit a distress call until you hold DISTRESS for 

at least three seconds. If you inadvertently make a distress call, 

or are no longer in distress, you should cancel the call 

immediately by transmitting a voice message to all stations on 

channel 16.

1

Select 

CANCEL

 > 

YES

, and wait until 

DISTRESS CANCEL 

HAS BEEN SENT

 appears on the screen.

2

Select 

OK

.

3

Hold 

PTT

 on the handset, and transmit an appropriate voice 

message to cancel the distress call (

Distress Call 

Cancellation Script

, page 5

).

4

Select an option:
• Select 

END

 to complete the distress-call cancellation and 

return to normal radio operation.

• Select 

RESEND

 to resend the distress-call cancellation 

and start the process again.

Distress Call Cancellation Script

When you revoke a DSC distress call (

Revoking a Distress Call

page 5

), you should transmit an appropriate cancellation 

message.
For example, "All stations, all stations, all stations, this is 

_____(vessel name), MMSI number ____, position ____(North 

Digital Selective Calling

5

Содержание VHF 115 AIS Series






































Отзывы: