Garmin STRIKER VIVID 7sv страница 34 Скачать руководство пользователя | Manualshive

Страница: 34 / 41

background image

Setting Alarms

CAUTION

The Beeper setting must be turned on to make alarms audible (

Setting the Beeper, page 4

). Failure to set

audible alarms could lead to injury or property damage.

Navigation Alarms

Select Settings > Alarms > Navigation.
Arrival: Sets an alarm to sound when you are within a specified distance or time from a turn or a destination.
Anchor Drag: Sets an alarm to sound when you exceed a specified drift distance while anchored.
Off Course: Sets an alarm to sound when you are off course by a specified distance.

System Alarms

Alarm Clock: Sets an alarm clock.
Device Voltage: Sets an alarm to sound when the battery reaches a specified low voltage.
GPS Accuracy: Sets an alarm to sound when the GPS location accuracy falls outside the user-defined value.

Sonar Alarms

Select Settings > Alarms > Sonar.
Shallow Water: Sounds when the water depth is shallower than the specified depth.
Deep Water: Sounds when the water depth is deeper than the specified depth.
Water Temp.: Sounds when the water temperature varies more than ± 2°F (± 1.1°C). Alarm settings are saved

when the device is turned off.
NOTE: You must connect the device to a temperature-capable transducer to use this alarm.

Fish: Sets an alarm to sound when the device detects a suspended target.

•

sets the alarm to sound when fish of all sizes are detected.

•

sets the alarm to sound only when medium or large fish are detected.

•

sets the alarm to sound only when large fish are detected.

Unit Settings

Select Settings > Units.
System Units: Sets the unit format for the device.
Variance: Sets the magnetic declination, the angle between magnetic north and true north, for your present

location.

North Reference: Sets the direction references used in calculating heading information. True sets geographic

north as the north reference. Grid sets grid north as the north reference (000º). Magnetic sets the magnetic
north as the north reference.

Position Format: Sets the position format in which a given location reading appears. Do not change this setting

unless you are using a map or chart that specifies a different position format.

Map Datum: Sets the coordinate system on which the map is structured. Do not change this setting unless you

are using a map or chart that specifies a different map datum.

Time Format: Sets a 12-hour, 24-hour, or UTC time format.
Time Zone: Sets the time zone.
Daylight Savings Time: Sets daylight savings time to Off or On.

Device Configuration

29

«
...
32
33
34
35
36
...
»

Содержание STRIKER VIVID 7sv










































Отзывы:

Нет отзывов

Похожие инструкции для STRIKER VIVID 7sv

Бренд: Samyung Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды