Overlay Numbers
: Allows you to customize the data shown on
the map.
Garmin Quickdraw Contours Settings
Select
Quickdraw Map
>
>
Quickdraw Contours
>
Settings
.
Display
: Displays Garmin Quickdraw Contours. The My
Contours option shows your own Garmin Quickdraw
Contours maps. The Community Contours option shows the
maps you have downloaded from the Garmin Quickdraw
Community.
Recording Offset
: Sets the distance between the sonar depth
and the contour recording depth. If the water level has
changed since your last recording, adjust this setting so the
recording depth is the same for both recordings.
For example, if the last time you recorded had a sonar depth
of 3.1 m (10.5 ft.), and today's sonar depth is 3.6 m (12 ft.),
enter -0.5 m (-1.5 ft.) for the Recording Offset value.
User Display Offset
: Sets differences in contour depths and
depth labels on your own contours maps to compensate for
changes in the water level of a body of water, or for depth
errors in recorded maps.
Comm. Display Offset
: Sets differences in contour depths and
depth labels on the community contours maps to compensate
for changes in the water level of a body of water, or for depth
errors in recorded maps.
Survey Coloring
: Sets the color of the Garmin Quickdraw
Contours display. When this setting is turned on, the colors
indicate the quality of the recording. When this setting is
turned off, the contour areas use standard map colors.
Green indicates good depth and GPS position, and a speed
under 16 km/h (10 mph). Yellow indicates good depth and
GPS position, and a speed between 16 and 32 km/h (10 and
20 mph). Red indicates poor depth or GPS position, and a
speed above 32 km/h (20 mph).
Depth Range Shading
: Specifies the upper and lower limits of a
depth range and a color for that depth range.
Depth Range Shading
You can set color ranges on your map to show the water depths
where your target fish are currently biting. You can set deeper
ranges to monitor how quickly the bottom depth changes within
a specific depth range. For inland fishing, a maximum of five
depth ranges can help reduce map clutter.
Red
From 0 to 1.5 m (from 0 to 5 ft.)
Orange
From 1.5 to 3 m (from 5 to 10 ft.)
Yellow
From 3 to 4.5 m (from 10 to 15 ft.)
Green
From 4.5 to 7.6 m (from 15 to 25 ft.)
Navigation with the STRIKER Plus
WARNING
When navigating, the course may pass over land or shallow
water. Use visual sightings, and steer to avoid land, shallow
water, and other dangerous objects.
You can set and follow a course to a destination using one of
two methods: Go To or Route To.
Go To
: Takes you directly to the destination. This is the
standard option for navigating to a destination. The device
creates a straight-line course or navigation line to the
destination. The path may run over land and other obstacles.
Route To
: Creates a route from your location to a destination,
allowing you to add turns along the way. This option provides
a straight-line course to the destination, but allows you to add
turns into the route to avoid land and other obstacles.
Searching for a Destination by Name
You can search for saved waypoints, saved routes, saved
tracks, and marine services destinations by name.
1
Select
User Data
>
xx
.
2
Enter at least a portion of the name of your destination.
3
If necessary, select
Done
.
The 50 nearest destinations that contain your search criteria
appear.
4
Select the destination.
Creating a Waypoint on the Map
1
From the
Quickdraw Map
, select a location.
2
Select .
A list of options appears along the right side of the chart. The
options vary based on the location or object you selected.
3
Select
Create Waypoint
.
Navigating to a Waypoint
1
From the
Quickdraw Map
, use the arrow keys to select the
waypoint.
The waypoint name appears on the screen.
2
Select .
3
Select
Navigate To
>
Go To
.
Creating and Navigating a Route Using the
Map
The starting point can be your present location or another
location on the map.
1
Select
User Data
>
Routes
>
New
>
Route Using Chart
.
2
Pan the map to select the starting location of the route.
3
Select to add a turn to the route.
4
Repeat to add all of the turns in the route.
5
Select
>
Navigate To
.
6
Select an option.
Stopping Navigation
From the map, select
>
Stop Navigation
.
Waypoints
Waypoints are locations you record and store in the device.
Marking Your Present Location as a Waypoint
From any screen, select .
Creating a Waypoint at a Different Location
1
Select
User Data
>
Waypoints
>
New Waypoint
.
8
Navigation with the STRIKER Plus
Содержание STRIKER PLUS 4
Страница 1: ...STRIKER PLUS4 5 7 9 Owner sManual...
