Garmin RV-IN1501, Руководство пользователя

Страница: 20 / 36

Connecting a UPnP Device
You must connect your stereo to a network, either wired or
wirelessly, to play media from a UPnP device, such as a NAS
device.
1
Connect your UPnP device to the same network as the
stereo, referring to the instructions provided with your UPnP
device and router if necessary.
2
Select the UPnP source on the stereo ( Selecting a Source ,
page 13 ).
You can browse and play media from the UPnP device the in
same way that you would from a USB flash drive ( Controlling
Music Playback on a Connected Android Device, USB Flash
Drive, or Media Player , page 15 ).
Audio Control
Adjusting the Volume for a Zone
1
Select Fusion Media > .
2
Select a zone.
TIP: To control all zones at the same time, select GLOBAL.
3
Drag the slider up or down.
Muting all Connected Stereos
You can quickly mute the audio from this stereo or from all
stereos connected to the network ( FUSION PartyBus
™
Networking , page 18 ).
From any source, select .
The mute symbol appears and audio from this stereo is
silenced.
Adjusting the Tones
1 Select Fusion Media > > ZONE .
2 Select a zone.
3
Select TONE .
4
Use the slider bar to adjust the level of each tone.
Disabling the Loud Setting for a Zone
The LOUD setting maintains frequency response at low volumes
and increases perceived loudness at high volumes. This setting
is enabled by default in all zones.
1
Select Fusion Media > > ZONE .
2
Select a zone.
3
Select LOUD to clear the option button.
Adjusting the Gain for an Auxiliary Device
You can adjust the gain for a connected auxiliary device to
achieve a volume level similar to that of other media sources.
You can adjust the gain in 1 dB increments.
1
Select an auxiliary source.
2 Move the slider left or right to increase or decrease the gain.
NOTE: To achieve the best audio quality when using a
portable media player with headphone output, it may be
necessary to adjust the volume control on the media player,
instead of adjusting the gain.
Speaker Zones
You can group speakers in one area into a speaker zone. This
enables you to control the audio level of the zones individually.
For example, you could make the audio quieter in the cabin and
louder on deck.
You can set the balance, volume limit, tone, subwoofer level,
subwoofer frequency, and name for each zone, and configure
other zone-specific settings ( Speaker Zone Settings , page 19 ).
Adjusting the Audio Settings for a Zone
1 Select Fusion Media > > ZONE .
2 Select a zone.
3
Select MORE .
4
Select one or more options:
NOTE: Not all options are available for all zones.
• To limit the maximum volume output of this zone, select
VOLUME LIMIT , and adjust the level.
• To set the subwoofer level for this zone, select SUB
LEVEL , and adjust the level.
• To adjust the right and left speaker balance of this zone,
select BALANCE , and adjust the balance.
Adjusting the Subwoofer Filter
You can use the subwoofer filter setting to control the subwoofer
cutoff frequency for each zone, which can enhance the blend of
the sound produced by the speakers and the subwoofer. Audio
signals above the selected frequency are not passed to the
subwoofer.
NOTE: If a DSP setting has been applied to zone, this setting
cannot be changed on the stereo. You can view the DSP setting
for the optimal cutoff frequency as calculated by the DSP
controller, but cannot adjust it.
1
Select Fusion Media > > ZONE .
2
Select a zone.
3
Select SUB FREQ .
4
Select a frequency.
DSP Settings
This stereo features digital signal processing (DSP). You can
select pre-configured DSP settings for FUSION
®
speakers and
amplifiers to optimize audio reproduction in their installed
locations.
All DSP settings are configured using the FUSION-Link
™ remote
control app ( FUSION-Link Wireless Remote Control App ,
page 20 ).
Configuring the DSP Settings
You must download and install the FUSION-Link remote control
app on your compatible Apple or Android device before you can
configure the DSP settings ( FUSION-Link Wireless Remote
Control App , page 20 ).
You can configure the DSP settings to optimize the sound on
each zone with the installed speakers, amplifiers, and
environment.
1
From the settings menu on your Apple or Android device,
connect to the stereo using Bluetooth technology, or connect
to the same wireless network as the stereo.
2
Open the FUSION-Link remote control app on your
compatible Apple or Android device.
3
If necessary, select the stereo you want to configure.
4 Select > MUSIC SETTINGS .
5 Select a zone.
6
Select DSP SETTINGS .
7
Configure the DSP settings as needed, depending on the
models of FUSION speakers and amplifiers connected to the
zone.
8
Repeat these steps for each zone.
9 After you have finished configuring the DSP settings for all
zones, select an option:
• On an Apple device, select >
Zone > SETTINGS >
SEND DSP SETTINGS
• On an Android device, select > Zone > SEND DSP
SETTINGS .
Bluetooth Device Playback
You can pair the stereo to up to eight Bluetooth media devices.
14 Media Playback