11-4
·
Move the cursor over “OK?” and press the ENT key. The CDI alarm
is now armed.
To turn off the CDI alarm...
·
Move the cursor over the cyclic field to the right of the CDI alarm
distance. Press the CLR key to select “OFF” for the CDI alarm.
·
Move the cursor over “OK?” and press the ENT key. The CDI alarm
is now cleared.
The arrival alarm will inform you with an alarm tone and the message
“ARRIVAL AT _____” when you reach your destination. If your speed is less
than 65 knots, the alarm radius you enter will also be used to inform you when
you approach a waypoint with the message “APPROACHING _____”.
To set the arrival alarm...
·
Enter the arrival alarm distance.
·
Press the CLR key to select “ON” for the arrival alarm.
·
Move the cursor over “OK?” and press the ENT key. The arrival alarm
is now armed.
To turn off the arrival alarm...
·
Move the cursor over the cyclic field to the right of the arrival alarm
distance. Press the CLR key to select “OFF” for the arrival alarm.
·
Move the cursor over “OK?” and press the ENT key. The arrival alarm
is now cleared.
The GPS 100 is capable of monitoring your anchor for slippage. If your boat
drifts away from the anchor position more than the specified distance, you will
be informed with an alarm tone and the message “ANCHOR DRAG ALARM”.