Garmin IPH-A3095, Руководство пользователя

Страница: 26 / 46

3 Pan and zoom the map to center the location in the
crosshairs.
4
Hold to select the point indicated by the crosshairs.
5
If necessary, select a nearby point of interest.
6
Select an option:
• To start navigating to the location, select
Go .
• To view the location on the map, select Map .
• To save the location, select Save .
• To view information about the location, select Review .
Navigating with the Around Me Feature
You can use the around me feature to navigate to nearby points
of interest and waypoints.
NOTE: The map data installed on your device must include
points of interest to navigate to them.
1
From the map, hold UP .
2 Select Around Me .
Icons indicating points of interest and waypoints appear on
the map.
3 Select UP or DOWN to highlight a section of the map.
4 Select .
A list of points of interest and waypoints in the highlighted
map section appear.
5 Select to select a location.
6
Select an option:
• To start navigating to the location, select
Go .
• To save the location, select Save Location .
• To view information about the location, select Review .
Compass
The device has a 3-axis compass with automatic calibration.
The compass features and appearance change depending on
your activity, whether GPS is enabled, and whether you are
navigating to a destination. You can change the compass
settings manually ( Compass Settings , page 27 ). To open the
compass settings quickly, you can select from the compass
widget.
Altimeter and Barometer
The device contains an internal altimeter and barometer. The
device collects elevation and pressure data continuously, even
in low-power mode. The altimeter displays your approximate
elevation based on pressure changes. The barometer displays
environmental pressure data based on the fixed elevation where
the altimeter was most recently calibrated ( Altimeter Settings ,
page 27 ). To open the altimeter or barometer settings quickly,
select from the altimeter or barometer widgets.
History
History includes time, distance, calories, average pace or speed,
lap data, and optional ANT+ sensor information.
NOTE: When the device memory is full, your oldest data is
overwritten.
Using History
History contains previous activities you have saved on your
device.
1
Hold UP .
2
Select History > Activities .
3 Select an activity.
4 Select an option:
• To view additional information about the activity, select
Details .
• To select a lap and view additional information about each
lap, select Laps .
• To select an interval and view additional information about
each interval, select Intervals .
• To view the activity on a map, select Map .
• To view the impact of the activity on your aerobic and
anaerobic fitness, select Training Effect ( About Training
Effect , page 12 ).
• To view your time in each heart rate zone, select Time in
Zone ( Viewing Your Time in Each Heart Rate Zone ,
page 20 ).
• To view an elevation plot of the activity, select Elevation
Plot .
• To delete the selected activity, select Delete .
Multisport History
Your device stores the overall multisport summary of the activity,
including overall distance, time, calories, and optional accessory
data. Your device also separates the activity data for each sport
segment and transition so you can compare similar training
activities and track how quickly you move through the
transitions. Transition history includes distance, time, average
speed, and calories.
Viewing Your Time in Each Heart Rate Zone
Before you can view heart rate zone data, you must complete an
activity with heart rate and save the activity.
Viewing your time in each heart rate zone can help you adjust
your training intensity.
1 Hold UP .
2
Select History > Activities .
3
Select an activity.
4
Select Time in Zone .
Viewing Data Totals
You can view the accumulated distance and time data saved to
your device.
1
Hold UP .
2
Select History > Totals .
3
If necessary, select an activity.
4 Select an option to view weekly or monthly totals.
Using the Odometer
The odometer automatically records the total distance traveled,
elevation gained, and time in activities.
1 Hold UP .
2
Select History > Totals > Odometer .
3
Select UP or DOWN to view odometer totals.
Deleting History
1 Hold UP .
2 Select History > Options .
20 History