manualshive.com logo in svg

Garmin GTX 33, Руководство по установке

Поделиться
Скачать
Garmin GTX 33 Скачать руководство пользователя страница 33

190-00906-00

GTX 33 Installation Manual

Rev. F

Page 3-3

3.3 Backshell Assembly

The GTX 33 connector kit includes one Garmin backshell assembly. Garmin’s backshells give the installer 
the ability to quickly and easily terminate shield grounds at the backshell housing using one of two 
methods available (SPIDER or Shield Block).

NOTE

The SPIDER grounding method is permitted for previous installations, however Garmin 
recommends the use of the Shield Block grounding method for all new installations.

G1000 Installations:

To assemble the backshell and grounding system, refer to the instructions provided in the G1000 System 
Installation Manual (190-00303-00), as well as the SPIDER Installation Instructions (190-00313-03) and 
Shield Block Installation Instructions (190-00313-09).

Non-G1000 Installations:

GTX 33 installations mounted as a remote transponder system, the connector and backshell assembly is 
shown below. Refer to the SPIDER Installation Instructions (190-00313-02) and Shield Block Installation 
Instructions (190-00313-09) for grounding instructions.

1. Backshell Cast Housing.  Provides a mounting point for connector accessories.
2. D-Subminiature 62 pin connector.
3. Ground System (SPIDER ground shown). Allows shield grounds to be made to the backshell 

housing.

4. Strain Relief Tab.  Fastens wiring bundle to housing.

Содержание GTX 33




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды