manualshive.com logo in svg

Garmin GTX 327, Руководство по установке

Поделиться
Скачать
Garmin GTX 327 Скачать руководство пользователя страница 37

GTX 327 Installation Manual

Page 5-7

190-00187-02

Revision K

5.2.4 CONTRAST CONFIGURATION Page

CONTRAST MODE

Selection

Description

MAN (Manual)

The display contrast is manually adjusted either here or by the pilot
using the GTX 327 CONTRAST page.

AUTO (Automatic)

DEFAULT.  The display contrast is automatically compensated for
temperature and other factors.  An offset can be entered in the contrast
level adjustment described below.

CONTRAST LEVEL ADJUSTMENT

This is a “slider” bar graph control.  Use the 8 key to move it further to the left, decreasing the contrast
level.  Use the 9 key to move it to the right, increasing the contrast level.  It is set to 50% at the factory.
In manual contrast mode, this is a direct adjustment of the display contrast level.  In automatic contrast
mode, this adjusts the offset to the automatically compensated contrast.  Numeric ranges are: contrast
level (1-63) and contrast offset (0-99; default 50).

CONTRAST CONFIGURATION Page

Содержание GTX 327


























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды