3
Note:
Operators may use STC SA0487SE qualification
of the GRC/GRT 0 as a basis for showing compliance
with 4 CFR Part 9.2.
Note:
This device has been approved for use in the USA
and Canada only.
Note:
The USB port is for factory use only.
introduction
The GRC 0 is a remote control for the XM radio function of the
GDL 69A. The GRC 0 uses a radio link and does not need to be
pointed at the receiver. The GRC 0 range is approximately 0 m
(30 feet) and should work anywhere in the cabin.
System info
System information about the GRC 0 is available from the Menu
page. Information includes: GRC 0 Software Versions, GRT 0
Software Versions, and the RF Pairing ID. The GRC 0 serial number is
located under the batteries.
To view System Info
. Press the
MeNu
key.
2. Press the
p
or
q
key to highlight the System info menu
selection.
3. Press the
u
key to show the System info.
4. Press
MeNu
,
XM
, or one of the arrow keys to return to the
Menu.
Caring for the GRC 10
The GRC 0 is constructed of high quality materials and does not
require user maintenance other than cleaning. Clean the unit using
a cloth dampened with mild detergent solution and then wipe dry.
Avoid chemical cleaners and solvents that may damage plastic
components.
