background image

96/96C Owner’s Manual 

B

aSIc

 o

peratIon

 > 

 

each turn in the route a turn page shows a guidance 

message and graphic of the turn. You can view the 

turns at any time by pressing the 

ROCKER

 up or 

down while the route is active.
• In Automotive Mode these two navigation methods 

change when you select the “Follow Roads” option 

from the Routing Setup Page. Both Go To navigation 

and point to point routing become routes that allow 

you to navigate using roads.
The routes use existing roadways (either those in 

the basemap or from downloaded detail mapping) to 

automatically calculate a route to your destination. 

Turns on roadways are added to the active route page 

and is preceded by a guidance message with a graphic 

screen of the turn.  
If there are not enough roads at your location to 

calculate a route, a message appears.

Navigating a Route

After you have created a route, you can begin 

navigation immediately or save it to the Saved Routes 

list as explained on 

page 72

.

When you are navigating a route, a guidance message 

and graphic view of turns in the route shows as you 

approach each one. Using the “Follow Roads” option 

from the Routing Setup Page increases the number of 

turns and shows an Active Route Page with a list of 

turns. If you selected the “Off Road” option you can 

view only the list of points for a route from the Active 

Route Page. (See Routing Setup on 

page 107

)

Содержание GPSMAP 96 - Hiking























































































































































Отзывы: