Garmin GPSMAP 8000 Series Скачать руководство пользователя страница 33

3

Enter a new passcode.

4

Confirm the new passcode.

Restoring Default Parental Control Settings Values

This process deletes all the settings information you have 

entered. When you restore the parental control settings to their 

default values, the passcode value is reset to 0000.

1

From the media menu, select 

Installation

 > 

Factory 

Defaults

.

2

Select 

Yes

.

Clearing All Locked Channels on a SiriusXM Radio

Before you can clear all locked channels, the parental controls 

must be unlocked.

1

From the media screen, select 

Browse

 > 

Parental

 > 

Clear 

All Locked

.

2

Enter your passcode.

Setting the Device Name

1

From the media screen, select 

Menu

 > 

Installation

 > 

Set 

Device Name

.

2

Enter a device name.

3

Select 

Select

 or 

Done

.

SiriusXM Weather

 WARNING

The weather information provided through this product is subject 

to service interruptions and may contain errors, inaccuracies, or 

outdated information, and consequently should not be relied 

upon exclusively. Always use common sense while navigating, 

and check alternate weather information sources prior to making 

safety-related decisions. You acknowledge and agree that you 

shall be solely responsible for use of the weather information 

and all decisions taken with respect to navigating in weather. 

Garmin will not be responsible for any consequences of using 

SiriusXM weather information.

NOTE: 

SiriusXM data is not available in all regions.

A Garmin SiriusXM satellite weather receiver and antenna 

receives satellite weather data and shows it on various Garmin 

devices, including the Navigation chart on a compatible 

chartplotter. The weather data for each feature comes from 

reputable weather data centers such as the National Weather 

Service and the Hydrometeorological Prediction Center.

SiriusXM Equipment and Subscription 

Requirements

To use satellite weather, you must have a compatible satellite 
weather receiver. To use SiriusXM satellite radio, you must 
have a compatible satellite radio receiver. You must also have a 
valid subscription to receive satellite weather and radio. For 
more information, refer to the instructions for your satellite 
weather and radio equipment.

Weather Data Broadcasts

Weather data is broadcast at different intervals for each weather 

feature. For example, radar is broadcast at five-minute intervals. 

When the Garmin receiver is turned on, or when a different 

weather feature is selected, the receiver must receive new data 

before it can be shown. You might experience a delay before 

weather data or a different feature appears on the chart.

NOTE: 

Any weather feature can change in appearance if the 

source that provides the information changes.

Changing the Weather Chart

1

From a combination screen or SmartMode layout with a 

weather chart, select 

Menu

 > 

Weather Menu

 > 

Change 

Weather

.

2

Select a weather chart.

Viewing Precipitation Information

Precipitation ranging from very light rain and snow, up to strong 

thunderstorms, is indicated in varying shades and colors. 

Precipitation is shown either independently or with other weather 

information.

Select 

Charts

 > 

Precipitation

.

The time stamp in the upper-left corner of the screen 

indicates the elapsed time since the weather data provider 

last updated the information.

Precipitation Views

From the precipitation weather chart, select Menu.

RADAR Loop

: Shows precipitation information as an image of 

the latest update or as an animated loop of the latest 

updates. The time stamp indicates the elapsed time since the 

service provider generated the weather radar frame currently 

displayed on the screen.

Cloud Cover

: Shows cloud cover data.

Waypoints

: Shows waypoints.

Legend

: Shows the weather legend.

Storm Cell and Lightning Information

Storm cell are represented by 

 on the weather precipitation 

chart. They indicate both the present position of a storm and the 

projected path of that storm in the immediate future.
Red cones appear with a storm cell icon, and the widest part of 

each cone points in the direction of the projected path of the 

storm cell. The red lines in each cone indicate where the storm 

will most likely be in the near future. Each line represents 15 

minutes.
Lightning strikes are represented by  . Lightning appears on the 

weather precipitation chart if strikes were detected within the last 

seven minutes. The ground-based lightning detection network 

detects cloud-to-ground lightning only.

NOTE: 

This feature is not available on all devices and in all 

subscriptions.

Hurricane Information

The weather Precipitation chart can show the present position of 

a hurricane  , a tropical storm, or a tropical depression. A red 

line stemming from a hurricane icon indicates the projected path 

of the hurricane. Darkened dots on the red line indicate the 

projected locations through which the hurricane will pass, as 

received from the weather data provider.

Weather Warnings and Weather Bulletins

When a marine weather warning, weather watch, weather 

advisory, weather bulletin, or other weather statement is issued, 

shading indicates the area to which the information applies. The 

aqua lines on the chart indicate the boundaries of marine 

forecasts, coastal forecasts, and offshore forecasts. Weather 

bulletins may consist of either weather watches or weather 

advisories.
To view information about the warning or bulletin, select the 

shaded area.

Color

Marine Weather Group

Cyan

Flash Flood

Blue

Flood

Red

Marine

32

SiriusXM Weather

Содержание GPSMAP 8000 Series











































Отзывы: