Garmin GPSMAP 500 Series, Руководство по установке

Страница: 84 / 107

500 SERIES INSTALLATION MANUAL Page 5-11
P/N 190-00181-02 Page Rev. B
CDI (LAT/VERT)
Selection Verify That:
Max left/up The CDI is “pegged” to the left/up.
Full left/up The CDI is deflected full scale to the left/up.
Center The CDI is centered.
Full right/down The CDI is deflected full scale to the right/down.
Max right/down The CDI is “pegged” to the right/down.
FLAG (LAT/VERT)
Selection Verify That:
Hide The LAT/VERT flag is hidden.
View The LAT/VERT flag is in view.
S-FLG (LAT/VERT)
Selection Verify That:
Hide The LAT/VERT superflag is hidden.
View
The LAT/VERT superflag is in view.
TO-FR
Selection Verify That:
FROM The FROM flag is in view.
Hide The TO/FROM flag is hidden.
TO The TO flag is in view.
SELECTED COURSE
Select 150° on the CDI/HSI that is connected to the 500 Series VOR/LOC/GS OBS inputs. The
SELECTED COURSE field should indicate near to 150° and a Calibrate to 150°? field will appear.
Selecting this field will calibrate the 500 Series to match the input source. Verify OBS operation by
checking that the course displayed on the 500 Series is within 2° of the selected course. Do this at 30°
intervals around the OBS card.
DME CHNL MODE
This configuration allows you to set the format for DME tuning data output.
Selection Description
King Serial King Serial DME tuning data (not operational for MAIN software versions
2.02 and lower).
Parallel 2x5 2 of 5 parallel DME tuning.
Parallel BCD Shifted BCD (Binary Coded Decimal) parallel DME tuning (not operational
for MAIN software versions 2.02 and lower).
Parallel slip Slip-code parallel DME tuning (not operational for MAIN software versions
2.02 and lower).
Narco 890/891 2 of 5 parallel DME tuning, compatible with the following DME units:
Narco DME 890
Narco IDME 891