Garmin GPSMAP 276C Скачать руководство пользователя

Страница: 114 / 134

Interfacing

The following formats are supported for connection of external

devices: GARMIN proprietary Differential GPS (DGPS), NMEA

0180, 0182, 0183 (versions 1.5, 2.0, 2.3, 3.01), ASCII Text Output,

and RTCM SC-104 input (version 2.0).
The following are the Approved Sentences for NMEA 0183,

version 3.01 output: GPRMC, GPGGA, GPGSA, GPGSV, GPGLL,

GPBOD, GPRTE, and GPWPL. The following are the Proprietary

Sentences for NMEA 0183, version 3.01 output: PGRME, PGRMZ,

and PGRMM.
The GPSMAP 276C also includes NMEA input with support for

the BWC, DBT, DPT, DSC, DSE, MTW, VHW, VTG, and XTE

sentences.
Garmin’s proprietary communication protocol is available from the

Web site at

www.garmin.com

Removing the GPS Antenna

You can remove the GPS antenna to use an external antenna. After

the antenna is removed, the BNC connector is exposed and ready

for use with an external antenna. For information on connecting

an external antenna to the GPSMAP 276C, refer to the installation

instructions that came with the antenna.

To remove the GPS antenna:

1. Remove the external power cable from the connector on the

back of the GPSMAP 276C.

2. Rotate the antenna to approximately a seven o’clock

position. The alignment notches in the casing must line up

with the notches on the antenna.

3. Pull the antenna away from the GPSMAP 276C unit.

Removing the GPS Antenna

106

GPSMAP 276C Owner’s Manual

PPendIx

nstAllAtIon

nforMAtIon

Содержание GPSMAP 276C







































































































































Результаты поиска

Содержание GPSMAP 276C

Отзывы:

Похожие инструкции для GPSMAP 276C

Бренды по названию

Популярные бренды

Garmin GPSMAP 276C, Руководство пользователя

Результаты поиска

Содержание GPSMAP 276C

Отзывы:

Похожие инструкции для GPSMAP 276C

Бренды по названию

Популярные бренды