INTRODUCTION
This is a tracking device (tracker) which uses GPS-based location
positioning to provide information about the location. And GSM/
GPRS for data connection. The tracker includes a SIM-card, which
supports roaming, SMS and voice throughout Europe.
NB!
Voice and SMS to the tracker will result in mobile fees. Information
about prices can be obtained from your mobile service provider.
In order to use the tracker, the Huntloc App needs to be downloaded
to the user’s smartphone, and the User License also needs to be
activated. At the moment Huntloc App is available only for Android
and iOS operating systems.
NB!
When using the Huntloc App, constant GPS and GPRS service
needs to be available. Monthly data and subscription prices can be
obtained from your mobile service provider.
DEVICE
1.
GREEN LED:
GPS
blinking:
GPS is
on, searching for
GPS
ON:
GPS is on,
position is located
2.
BLUE LED:
GSM
blinking:
GSM is
on, standby mode
ON:
connection
with server
3.
RED LED:
CHARGING
blinking:
tracker
is connected with
charger & charging
BATTERY CHARGE
Before fi rst use, you must charge the battery. To charge tracker, use
the Qi wireless charging pad.
1. To begin charging, connect charging pad into mains power supply
using the microUSB cable. Charging pad led indicator should go red.
2. Place the tracker on the charging pad. The red led on tracker
should light and charging pad led indicator goes blue.
CONFIGURATIONS
In order to connect Huntloc App with the tracker:
1. Open Huntloc App and choose
“Trackers”
from the menu.
2. To connect the new tracker: choose
“+”
and then choose type of
the tracking device.
3. Insert the tracker’s IMEI code and the GSM number, including the
international code. Information is provided on the box and also on
the tracker.
4. Then enter the name of the object that is being tracked. This name
will appear on the tracking screen. (ie. the dog´s name). After saving
the data, the tracker will be added to the list of tracking devices.
ACTIVATING TRACKER (STAND-BY MODE)
1. To turn the tracker on, place the tracker on the charging pad.
2. Wait until the GPS LED (blue) starts blinking.
TURNING ON TRACKING MODE
1. Make sure that the tracker is on stand-by mode (blue LED is
blinking).
2. Open Huntloc App and choose
“Trackers”
from menu.
3. Choose the relevant device.
4. Push the
“On”
button and confi rm to start tracking, which results
in a call to tracker. Call will be terminated by the tracker.
To share tracking of the object with another hunter, the tracker owner
has to start or join with an active hunt, on the Huntloc App.
CHANGING TRACKING MODE TO STAND-BY
1. Open the Huntloc App and choose
“Trackers”
from the menu.
2. Choose the relevant device.
3. Push the
“OFF”
button and confi rm SMS sending request.
TURNING OFF THE TRACKER
1. Open the Huntloc App and choose
”Trackers”
from the menu.
2. Choose the relevant device.
3. Select
“X”
from the top menu bar and confi rm SMS sending
request.
NB!
When the tracker is turned off, it is impossible to
activate it by using a smart device.
To put the tracker back into
‘stand-by’
mode, place the tracker on charging pad.
CHANGING TRACKING INTERVAL
1. Open the Huntloc App and choose
”Trackers”
from the menu.
2. Choose the relevant device.
3. Enter data transmitting interval in seconds, in interval fi eld.
4. Push the
“Apply”
button and confi rm SMS sending request. When
tracking, device is in
‘Stand-by’
mode, changing the tracking interval
will activate
‘tracking’
mode. The default tracking interval is 10
seconds. Shorter interval results in shorter battery life.
LISTENING TO THE DOG AND SENDING
VOICE COMMANDS
1. Open the Huntloc App and choose
”Trackers”
from the menu.
2. Choose the relevant device.
3. Push the
“Call”
button and agree with calling. The tracker will
automatically answer the call, and then the dog owner can hear the
dog´s barking. The owner can then also give voice commands to the
dog.
In order to make a call to the tracker, it has to be in
‘Tracking’
mode.
If the device is in
‘Stand-by’
mode, it will be activated and changed
to
‘Tracking’
mode.
NB! Listening dog barking on the phone will incur phone
costs.
NOT USING THE DEVICE FOR
LONG PERIODS
When the tracker is not used for a long time, its battery will need
to be fully charged and turned off. Otherwise the battery may be
irreversibly damaged, and might not work afterwards.
MORE INFORMATION
More information about the tracker and about Huntloc’s solution,
please do visit our website
www.huntloc.com
.
USER MANUAL HLT-2.6
1
2
3
Charging side
Charging pad
