Change Data Fields? allows you to specify the data displayed in each data field
used on the map display. The following options are available:
BRG- bearing to active wpt DIS- distance to active wpt
SOG- speed over ground
COG- course over ground
ETE- estimated time enroute ETA- estimated time of arrival
XTK- crosstrack error
VMG- velocity made good
TRN- turn angle to wpt
WPT- active wpt name
DPT- depth
TMP- temperature
STW- speed through water
To change a data field:
1. Highlight the Change Data Fields? option and press
T
.
2. Move the field highlight to the desired field and press
T
.
3. Select a data field option and press
T
.
Restore Defaults? resets all map page options (except map configuration options,
see pages 41-42) to the factory settings.
Setup Simulator? allows you to define simulator speed, course, altitude, depth,
and position values.
See the Getting Started Tour for more on the simulator mode.
SECTION
4
MAP PAGE
Options
44