Garmin GPS 155XL, Руководство по установке

Страница: 27 / 57

GPS 155Xl/GNC 300XL Installation Manual
P/N 190-00067-22 Rev E Page 4-2
4.3.1 Display Adjustment
This page allows the setting of display parameters that affect the display backlight and lighting brightness in
automatic mode.
•
"response time" sets the speed with which the brightness responds to ambient light changes. The higher
the number, the slower the display responds.
•
" min" sets the minimum brightness of the display. The higher the number, the brighter the minimum
brightness.
•
" slope" sets the sensitivity the brightness of the display has to changes in ambient light. The higher the
number, the brighter the display will be for a given increase in ambient lighting.
For more information on the display setting, see the display contrast and mode set page and the backlight set page
described in the Pilot’s Guide (P/N 190-00067-20 for the GPS 155XL and P/N 190-00067-30 for the GNC 300XL).
4.3.2 I/O Channel 1
Select the I/O CHANNEL 1 Test Page. Change the selectable input and output to match that of the installed
equipment. The available options are:
Input: Field Description
off No units connected to Channel 1 input
icarus-alt Serial altitude received from:
Icarus, Model 3000, Mode C Serializer
shadin-alt Serial altitude received from:
Shadin 9000T Serializer System (Non-TSO'd)
Shadin 9200T Series Serializer System (Non-TSO'd)
Shadin 8800T Series Encoder System (TSO'd)
shadin-fuel Fuel information received from:
Shadin 91204XT Series Digital Fuel Management System (TSO'd)
Shadin 91053XT Series Digital Fuel Management System (TSO'd)
arnav/ei-fuel Fuel information received from:
Arnav, Model FC- 10, Fuel Computer (TSO'd)
Arnav, Model FT- 10, Fuel Totalizer (TSO'd)
Electronics International, Model FP-5L, Fuel Flow
Computer (Non-TSO'd)
shadin-adc Air data information received from various models from the 9628XX-X family
shadin-fadc Fuel/Air data information received from various models from the 9628XX-X
family