3.2 WPT PAGE GROUP
This second page group provides information for thousands of airports, VORs, NDBs,
intersections, runways, frequencies, and procedures.
To quickly select a WPT page:
1. From any page, press and hold the
CLR
Key to select the Default NAV Page.
2. Turn the large
right
knob to select the WPT Page Group. ‘WPT’ appears in the
lower right corner of the screen.
3. Turn
the
small
right
knob to select the desired WPT page. The WPT Page
Group includes seven pages. While viewing any WPT page, turn the small right
knob to select a different WPT page. The first four pages provide detailed
information for the selected airport: location, runways, frequencies and
approaches. The last three pages provide information for intersections, NDBs
and VORs. After a WPT page is selected, information for a waypoint may be
viewed by entering the identifier (or name) of the desired waypoint. Airports,
NDBs, and VORs may be selected by identifier or facility name.
To enter a waypoint identifier:
1. Select the desired WPT page and press the small
right
knob to activate the
cursor.
2. Turn the small
right
knob to select the first character of the waypoint’s
identifier. Once the first character is flashing
you can use the PC keyboard
to
enter an identifier.
3. Turn the large
right
knob to select the next character field.
4. Turn
the
small
right
knob to select the desired character.
5. Repeat steps 3 and 4 until the identifier is selected, then press the
ENT
Key.
6. To remove the flashing cursor, press the small
right
knob.
