Garmin GNS 430, Быстрая справка

Страница: 15 / 22

GNS 430 Quick Reference
NEAREST AIRPORTS
15
TO SCROLL THROUGH THE LIST OF
FREQUENCIES
1) Activate the cursor, if not already active, by
pressing the small right knob.
2) Turn the large
right
knob to move the cursor
through the list of frequencies. If there are
more frequencies in the list that can be
displayed on the screen, a scroll bar along the
right-hand side of the screen indicates which
part of the list is currently being displayed.
TO AUTO-TUNE A FREQUENCY FROM THE
NAVCOM PAGE
1) Highlight the desired frequency by scrolling
through the list of frequencies, as described in
the preceding procedure.
2) To place a frequency in the standby field of the
COM or VLOC Window, highlight the desired
frequency and press the
ENT
Key.
BOTTOM ROW ANNUNCIATORS AND MESSAGES
TERRAIN Annunciator:
TERRAIN, TERRAIN
(Flashing),TER FAIL, TER INHB,
or TER N/A (see Pilot’s Guide for
detailed information)
CDI/RAIM Mode:
Approach, Enroute,
Oceanic Terminal,
or ‘0.30’ (for VLOC
approaches)
Navigation
Source: GPS
or VLOC
Integrity Failure or
Position Warning
(‘WARN’) Annunciator
(RAIM protection limit
failure)
Message Annunciator: On,
Flashing (new message), or
blank(no message)
Page Indicator (NAV/
WPT/AUX/NRST/FPL/
DRCT/PROC/MSG),
Waypoint Alert (‘NEXT
DTK’), or Turn Advisory
(‘TURN TO’_), etc.
TO VIEW A LIST OF NEAREST AIRPORTS
1) Turn the large
right
knob to select the NRST
Page Group. ‘NRST’ will appear in the lower
right corner of the screen.
2) If necessary, turn the small right knob to select
the Nearest Airport Page.
TO SCROLL THROUGH THE LIST OF
NEAREST AIRPORTS
1) Press the small
right
knob to activate the
cursor.
2) Turn the large
right
knob to scroll through the
list. The scroll bar along the right-hand side of
the page will indicate which part of the list is
currently being viewed.
3) To remove the flashing cursor, press the small
right knob.