manualshive.com logo in svg

Garmin GNC 420AW, Руководство по установке

Поделиться
Скачать
Garmin GNC 420AW Скачать руководство пользователя страница 30

 

Page 1-14 

 

400W Series Installation Manual 

Rev. G 

190-00356-02  

1.6.2 TSO 

Deviations 

TSO Deviation 

1.  Garmin was granted a deviation from TSO-C34e to use RTCA/DO-178B minimum software level C instead 
of RTCA/DO-178A level 2 to demonstrate compliance for the verification and validation of the computer 
software. 

TSO-C34e 

2.  Garmin was granted a deviation from TSO-C34e to use RTCA/DO-160C instead of RTCA/DO-160B as the 
standard for Environmental Conditions and Test Procedures of Airborne Equipment. 

1.  Garmin was granted a deviation from TSO-C36e to use RTCA/DO-178B minimum software level C instead 
of RTCA/DO-178A level 2 to demonstrate compliance for the verification and validation of the computer 
software. 

TSO-C36e 

2.  Garmin was granted a deviation from TSO-C36e to use RTCA/DO-160C instead of RTCA/DO-160B as the 
standard for Environmental Conditions and Test Procedures of Airborne Equipment. 

1. Garmin was granted a deviation from TSO-C37d to use RTCA/DO-178B instead of RTCA/DO-178A to 
demonstrate compliance for the verification and validation of the computer software. 
2. Garmin was granted a deviation from TSO-C37d paragraph (a)(1) to allow using RTCA /DO-186A instead of 
RTCA/DO-186 to specify minimum performance standards.  
3. Garmin was granted a deviation from TSO-C37d to allow a 6dB reduction of transmitter power during the 
Normal Operating Conditions – Emergency Operation Voltage as described in RTCA/DO-186A paragraph 
2.5.13.1 and RTCA/DO-160C paragraph 16.5.2.1. 
4. Garmin was granted a deviation from TSO-C37d paragraph (a)(5) to allow 8.33 kHz channel spacing in 
addition to the 25 kHz spacing. 

TSO-C37d 

5. Garmin was granted a deviation from TSO-C37d paragraph (b)(1) to allow marking to call our 8.33 kHz 
channel spacing in addition to the 25 kHz spacing. 
1. Garmin was granted a deviation from TSO-C38d to use RTCA/DO-178B instead of RTCA/DO-178A to 
demonstrate compliance for the verification and validation of the computer software. 
2. Garmin was granted a deviation from TSO-C38d paragraph (a)(1) to allow using RTCA /DO-186A instead of 
RTCA/DO-186 to specify minimum performance standards.   

TSO-C38d 

3. Garmin was granted a deviation from TSO-C38d paragraph (a)(5) to allow 8.33 kHz channel spacing in 
addition to the 25 kHz  spacing. 
1. Garmin was granted a deviation from TSO-C40c to use RTCA/DO-178B instead of RTCA/DO-178A to 
demonstrate compliance for the verification and validation of the computer software. 

TSO-C40c 

2. Garmin was granted a deviation from TSO-C40c to use RTCA/DO-160C instead of RTCA/DO-160B as the 
standard for Environmental Conditions and Test Procedures for Airborne Equipment. 
1. Garmin was granted a deviation from TSO-C113 section 2.1.2 (4) to use RTCA/DO-178B instead of 
RTCA/DO-178A to demonstrate compliance for the verification and validation of the computer software. 

TSO-C113 

2. Garmin was granted a deviation from TSO-C113 section 2.1.2 (3) to use RTCA/DO-160D instead of 
RTCA/DO-160B as the standard for Environmental Conditions and Test Procedures for Airborne Equipment. 
1. Garmin was granted a deviation from TSO-C146a for the requirement to use as a specific “NAV” labeled key. 
RTCA/DO-229c Table 2-5 lists the function “Access to primary navigation display (Section 2.2.1.4.1)” with a 
label “NAV”. 
2. Garmin was granted a deviation from TSO-C146a  not to implement RTCA/DO-229C paragraph 2.2.3.2.2 
which states “The equipment shall allow the pilot to initiate the missed approach with manual action. It shall be 
possible to take this action before crossing the MAWP, in which case the equipment shall automatically initiate 
the missed approach procedure at the MAWP.”  
3. Garmin was granted a deviation from TSO-C146a not to implement RTCA/DO-229C paragraph 2.2.4.2.3 
which states “If the aircraft is past the FPAP – (length offset), and the pilot has not already activated the missed 
approach, the receiver shall automatically transition to missed approach guidance.”  This requirement is being 
eliminated in DO-229D. 
4. Garmin was granted a deviation from TSO-C146a from RTCA/DO-229C paragraphs 2.2.4.6.4 and 2.2.5.6.4 
not to use the low altitude alerting function when the 400W series unit has TERRAIN enabled and is not in one 
of the following states: FAIL, N/A, TEST, or INHIBIT. When TERRAIN is not enabled, or when enabled but the 
current state is FAIL, N/A, TEST, or INHIBIT, the low altitude alert described in DO-229C 2.2.4.6.4 and 
2.2.5.6.4 is used. 

TSO-C146a 
 

5. Garmin was granted a deviation from TSO-C146a not to implement RTCA/DO-229C paragraph 2.2.1.4.9.c 
which states “BRG to or from a VOR: The bearing is based on the true-to-magnetic conversion at the waypoint 
location, using the same magnetic conversion as used to define the path.”  Instead, the “user” (current) location 
will be used. The RTCA/DO-229C paragraph 2.2.1.4.9.c requirement is being eliminated in DO-229D. 

 
 
 
 

6. Garmin was granted a deviation from TSO-C146a paragraph 4.b. which defines “each separate component 
that is easily removable (without hand tools), each interchangeable element, and each separate subassembly 
of the article that the manufacturer determines may be interchangeable must be permanently and legibly 
marked with at least the name of the manufacturer, manufacturer’s subassembly part number, and the TSO 
number.”  

Содержание GNC 420AW













































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды