background image

For the latest free software updates (excluding map data) throughout the life of your  

Garmin products, visit the Garmin Web site at www.garmin.com.

© 2010–2012 Garmin Ltd. or its subsidiaries

Garmin International, Inc. 

1200 East 151

st

 Street, Olathe, Kansas 66062, USA

Garmin (Europe) Ltd. 

Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9LR UK

Garmin Corporation 

No. 68, Zhangshu 2

nd

 Road, Xizhi Dist., New Taipei City, 221, Taiwan (R.O.C.)

www.garmin.com

September 2012 

190-01266-02 Rev. D 

Printed in Taiwan

All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage 

medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or 

other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must 

contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Garmin reserves the right to change or improve its products and to make changes in the content without 

obligation to notify any person or organization of such changes or improvements. Visit the Garmin Web site (www.garmin.com) for current updates and supplemental 

information concerning the use and operation of this and other Garmin products.
Garmin

®

, the Garmin logo, and GPSMAP

®

 are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. GMR™ and myGarmin™ are 

trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.
Furuno

®

 is a registered trademark of Furuno Electric Co., Ltd. Raymarine

®

 is a registered trademark of Raymarine Limited.

Содержание GMR 400/600/1200 xHD

















Отзывы: