background image

12  

GMR 400/600/1200 xHD Installation Instructions

Specifications

Pedestal (Physical)

Weight:

 45.9 lb. (20.82 kg)

Power Cable:

 49 ft. 2 

35

/

64

 in. (15 m) long

network Cable:

 49 ft. 2 

35

/

64

 in. (15 m) long 

GMR 400/600 xHD

Transmit Power:

 GMR 400 xHD: 4 kW

Transmit Power: 

GMR 600 xHD

:

 6 kW

Transmitter Frequency:

 9410 ±30 MHz

Input Voltage:

 10–40 Vdc (with the Voltage 

Converter Unit)

Typical Input Power:

 55 W

Input Power (100 kn wind): 

145 W max

range/Pulse Width/PrF (nm/nsec/Hz): 

0.125 – 0.5/75/3980

 

0.750 - 1/185/3975

 

1.5/235/3200

 

2.0/283/2750

 

3.0/370/1970

 

4.0/440/1736

 

6.0 – 12/535/1407

 

16 – 36/1032/800

 

48 – 72/1032/500

antenna rotation:

 24 rpm and 48 rpm

Max wind load:

 100 knots

receiver noise Figure:

 Less than 4 dB

environmental: 

Temp:

 from

 

14 to 140º F 

(from -10 to +60º C)

 

Humidity:

 95% at 95º F (35º C)

 

rel Wind:

 100 kn

 

Waterproof to IEC 60529 IPX6

range:

 65.5 ft. (20 m) mini, 72 nm max

range discrimination:

 65.5 ft. (20 m)

radar interference:

 Anti-jamming algorithm

Clutter suppression: 

Sea clutter and rain clutter

GMR 1200 xHD

Transmit Power:

 12 kW

Transmitter Frequency:

 9410 ±30 MHz

Input Voltage:

 20–40 Vdc (with the Voltage 

Converter Unit)

Typical Input Power:

 65 W

Input Power (100 kn wind): 

155 W max

range/Pulse Width/PrF (nm/nsec/Hz): 

0.125 – 0.5/75/3980

 

0.750 - 1/185/3975

 

1.5/235/3200

 

2.0/283/2750

 

3.0/370/1970

 

4.0/440/1736

 

6.0 – 12/535/1407

 

16 – 36/1032/800

 

48 – 72/1032/500

antenna rotation:

 24 rpm and 48 rpm

Max wind load:

 100 knots

receiver noise Figure:

 Less than 4 dB

environmental: 

Temp:

 from 14 to 140º F

(from -10 to +60º C)

 

Humidity:

 95% at 95º F (35º C)

 

rel Wind:

 100 kn

 

Waterproof to IEC 60529 IPX6

range:

  65.5 ft. (20 m) min, 72 nm max

range discrimination:

 65.5 ft. (20 m)

radar interference:

 Anti-jamming algorithm

Clutter suppression: 

Sea clutter and rain clutter

4 ft Open-Array Antenna

Type:

 End-fed slotted waveguide

Horizontal Beamwidth:

 1.8 degrees

Horizontal Sidelobes:

 

 

-23 dB within ±10 degrees of main

 

-30 dB outside ±10 degrees of main

Vertical Beamwidth:

 24 degrees

antenna Gain:

 29 dB

Polarization:

 Horizontal

Input return Loss:

 Better than -20 dB

Weight:

  12.2 lb. (5.53 kg)

6 ft. Open-Array Antenna

Type:

 End-fed slotted waveguide

Horizontal Beamwidth: 

1.1 degrees

Horizontal Sidelobes:

 

 

-25 dB within ±10 degrees of main

 

-30 dB outside ±10 degrees of main

Vertical Beamwidth:

 24 degrees

antenna Gain:

 30 dB

Polarization:

 Horizontal

Input return Loss:

 Better than -20 dB

Weight:

  16.9 lb. (7.67 kg)

Radar Display Features

Presentation Modes:

 North up, Course up, 

Heading up

VrM/eBL:

 1 user adjustable (GPSMAP 

4000/5000/6000/7000/700 series 

chartplotters) 

2 user adjustable, capable of floating 

(GPSMAP 3000 series chartplotters)

Bearing accuracy:

 1 degree

Controls:

 Auto & manual gain adjust; manual or 

auto (AFC) receiver tuning;

 

manual adjust for rain clutter and for sea 

clutter.

radar/Chart Overlay:

 Overlay mode is 

supported. Also has split overlay with 

standard radar presentation

Harbor Mode:

 Optimized radar performance in 

the harbor 

Offshore Mode:

 Optimized radar performance 

offshore

Dual range Mode:

 Simultaneous operation of 

two ranges displayed in split screen format

 

User selectable ranges of 

1

/

nm to 3 nm on 

left side and 

1

/

nm to 72 nm on right side

Timed Transmit:

 (GPSMAP 3000 series 

chartplotters) user-specified transmission and 

standby time.

Sentry:

 (GPSMAP 4000/5000/6000/7000/700 

series chartplotters) user-adjustable timed-

transmit mode

Zoom Mode:

 2x, 4x (GPSMAP 3000 series 

chartplotters only)

Trails (Wakes):

 Short, Medium, Long (GPSMAP 

3000 series chartplotters only)

Guard Zone alarm:

 2 guard zones—user 

adjustable

Off center Function:

 Look ahead (GPSMAP 

4000/5000/6000/7000/700 series 

chartplotters) 

Look ahead, Auto Shift and Manual 

(GPSMAP 3000 series chartplotters)

antenna rPM:

 Selectable to 24 or 48 rpm

MarPa:

 Tracks up to 10 MARPA targets for 

radar plotting and collision avoidance 

(Heading sensor is required)

Содержание GMR 400/600/1200 xHD

















Отзывы: