Garmin GMA 350c, Руководство пилота

Страница: 5 / 33

190-01134-12 Rev. K
Garmin GMA 350/350c Pilot’s Guide 10
GMA 350/350c Audio Panel
13
MIC2 – Selects the #2 transmitter for transmitting. COM2 receive
is simultaneously selected when this key is pressed allowing received
audio from the #2 COM receiver to be heard. COM1 receive can be
added by pressing the
COM1 Key. Selection of a second MIC button
initiates Split-COM mode. When in Split-COM mode, the pilot is
using COM1, the copilot is using the COM2.
14
PLAY – Press once to play the latest recorded memory block. Press
while audio is playing begins playing the previously recorded memory
block. Each subsequent press thereafter plays the previous block of
memory.
15
AUX – When selected, audio from the AUX inputs can be heard.
16
PILOT – Controls the pilot intercom system. Press and hold to toggle
3D Audio on/off for all headset positions.
17
COPLT – Controls the copilot intercom system. Press and hold to
toggle copilot configuration between crew and passenger.
18
PASS – Controls the passenger intercom system. Press and hold to
enable/disable passenger muting during reception.
19
SPKR – Selects and deselects the cabin speaker. COM, NAV, AUX, and
MKR receiver audio can be heard on the speaker. Press and hold for 2
seconds for Passenger Address (PA). The
SPKR key flashes during PA.
20
Cursor (CRSR) Control Knob – Turn to move the cursor (flashing
white or blue annunciator) to the desired source.
21
Volume (VOL) Control Knob – Turn the smaller knob to control
volume or squelch of the selected source (indicated by the flashing
white or blue annunciator). When the volume control cursor is not
active press to switch to Blue-Select mode. If the volume control cursor
is active, press twice (once to cancel the cursor, twice to activate Blue-
Select mode).