190-01878-05 Rev. A
Garmin GMA 345 3-COM Pilot’s Guide
21
GMA 345 3-COM Audio Panel
ENABLING 3D AUDIO
Press and hold the
PILOT
Key to toggle 3D audio processing on and off
for all headset positions. When 3D Audio is enabled, the aural message
“3D audio left” is heard in the left ear followed by “3D audio right” in the
right ear. If the aural messages are not heard in only the left and then the
right ear respectively, the cause may be aircraft wiring or headset settings.
Refer to the following table if a headset or aircraft wiring problem is
suspected.
3D Audio Troubleshooting
Symptom(s)
Cause(s)
Solution(s)
“3D audio left”
message heard in
both ears.
“3D audio right”
message not
heard
1)
Mono headset in
use
1)
Use a stereo headset
2)
Stereo headset in
use with mono/
stereo switch set to
‘mono’
2)
Set mono/stereo switch on headset
to ‘stereo’
3)
Aircraft wiring has
left audio wired to
both left and right
channels of stereo
headset jack
3)
If after checking solutions #1 and
#2 see a service center as soon as
possible to inspect/correct wiring.
This wiring fault can cause fail-safe
audio not to function.
“3D audio left”
message heard
in both ears,
followed by “3D
audio right”
message heard in
both ears
1)
Mono headset in
use
1)
Use a stereo headset
2)
Stereo headset in
use with mono/
stereo switch set to
mono
2)
Set mono/stereo switch on headset
to ‘stereo’
3)
Incorrect aircraft
wiring (left/right
shorted together)
3)
If after checking solutions #1 and
#2 see a service center as soon as
possible to inspect/correct wiring.
This wiring fault can cause fail-safe
audio not to function.
Содержание GMA 345 3-COM
Страница 1: ...GMA 345 3 COM pilot s guide...
Страница 33: ......