background image

GHP 10 Installation Instructions 

3

GHP 10 Package Contents and tools 

needed

The GHP 10 autopilot system consists of multiple components. 

Familiarize yourself with all of the components before beginning 

installation. You must know how the components operate together in 

order to correctly plan the installation on your boat.
As you familiarize yourself with the GHP 10 components, confirm 

that your package includes the items listed below. All the components, 

except the hydraulic pump, are included in the GHP 10 core box.  If any 

parts are missing, contact your Garmin dealer immediately.
Record the serial number of each component in the space provided.

Main Components

The GHP 10 autopilot system consists of five main components: the 

Electronic Control Unit (ECU), the Course Computer Unit (CCU), a 

hydraulic pump, the Shadow Drive

, and the GHC

 10 user control 

interface.

CCu

The CCU acts as the brain of the GHP 10. The CCU contains the 

sensory equipment used to determine heading. The CCU connects to the 

ECU and to the GHC 10 with a single cable. The CCU also connects 

to a NMEA 2000

®

 network to communicate with the GHC 10, and to 

optional NMEA 2000-compatible GPS devices (

page 12

).

Serial number 

ECu

The ECU connects to the CCU and to the drive unit. The ECU controls 

the drive unit based on information from the CCU. The ECU powers 

both the CCU and the drive unit.

Serial number 

Hydraulic Pump and Motor

The hydraulic pump (and motor) steers your boat by interacting with 

the hydraulic steering system, based on commands you enter using the 

GHC 10. The pump is not included in the GHP 10 core package box 

because the type of pump you use with your GHP 10 is determined 

by the size and type of steering system on your boat. The pump is 

in a separate box. For information on installing the pump, see the 

installation instructions included in the pump box.

Serial number 

Shadow Drive

The Shadow Drive is a sensor you install in the hydraulic steering 

lines of your boat. While the GHP 10 is engaged, the Shadow Drive 

temporarily disengages the autopilot when you manually take control of 

the helm. When you establish a new straight line heading, the Shadow 

Drive automatically reengages the autopilot.

Serial number 

GHC 10

The GHC 10 is the primary interface used to operate the GHP 10 

autopilot system. Using the GHC 10, you engage and steer the GHP 10. 

You also set up and customize the GHP 10 using the GHC 10.
The GHC 10 connects to a NMEA 2000 network to communicate 

with the CCU. The GHC 10 also connects with optional NMEA 

2000-compatible devices such as a GPS device, to use advanced 

features of the GHP 10. If NMEA 2000-compatible devices are 

not available, you can connect the GHC 10 to optional NMEA 

0183-compatible devices instead.

Serial number 

Содержание GHP 10 Marine Autopilot System



























Отзывы: