Garmin GFC 600 Скачать руководство пользователя страница 56

Страница: 56 / 78

Garmin GFC 600 Pilot’s Guide

190-01488-00 Rev. B

AFCS

APPROACH MODES (GPS, VOR, LOC)

NOTE:

Availability of Approach Modes depends on the installed navigation

equipment capabilities and interfaces.

NOTE:

The selected navigation receiver must have a valid VOR or LOC

signal or active GPS course for the Flight Director to enter Approach Mode.

Approach mode is selected by pressing the

APR

key. Approach mode acquires

and tracks the selected navigation source (GPS, VOR, or LOC), depending on
approach loaded in the navigator. This mode uses the selected navigation receiver
deviation and desired course inputs to fly the approach. Pressing the

APR

key

when the CDI deflection is greater than half scale arms the selected approach mode.

GMC 605 Annunciating GPS Approach Mode Armed

If the CDI deflection is less than half scale, the approach is automatically captured

when the

APR

key is pressed

When the AFCS is interfaced to a Directional Gyro (as opposed to an HSI), Approach

mode cannot be armed. The pilot must align the aircraft to be on course with the CDI
displaying less than half scale of deviation and then press the

APR

key to force capture

in Approach mode. The GMC 605 will display a message ‘SET HDG=CRS’ while any
Approach mode is active.

NOTE:

When the AFCS is interfaced to a DG, set the Selected Heading on

the DG to the same value as the Selected Course when an Approach mode
is active.

Содержание GFC 600















































































Результаты поиска

Содержание GFC 600

Отзывы:

Garmin GFC 600, Руководство пилота, Страница: 56 / 78

Результаты поиска

Содержание GFC 600

Отзывы: