background image

Garmin GFC 600 Pilot’s Guide

190-01488-00  Rev. B

34

AFCS

The Altitude Preselect function on a Garmin PFD allows the pilot to adjust the altitude 

bug to a target Selected Altitude for the AFCS to intercept, capture, and subsequently 
track in Altitude Hold mode.

The GMC 605 will annunciate ‘ALTS’ as the armed vertical mode while the active 

vertical mode is PIT, VS, IAS, or GA.

As the aircraft nears the Selected Altitude, the AFCS automatically transitions to 

Selected Altitude Capture mode with Altitude Hold mode armed.  This automatic 
transition is indicated by the ‘ALTS’ annunciation flashing for up to 10 seconds and the 
appearance of the ‘ALT’ annunciation.  The Selected Altitude is shown as the Altitude 
Reference.

At 50 feet from the Selected Altitude, the AFCS automatically transitions from 

Selected Altitude Capture to Altitude Hold mode and holds the reference altitude.  As 
Altitude Hold mode becomes active, the ‘ALT’ annunciation moves to the active vertical 
mode field and flashes for 10 seconds to indicate the automatic transition. 

GMC 605 Annunciating Selected Altitude Capture Mode

Changing the Selected Altitude on the PFD while Selected Altitude Capture mode 

is active causes the AFCS to revert to Pitch Hold mode with Selected Altitude Capture 
mode armed for the new Selected Altitude.

VERTICAL SPEED MODE (VS)

Vertical Speed mode is selected by pressing the 

VS

 key.  This mode acquires and 

maintains a Vertical Speed Reference.  The Vertical Speed Reference may be changed 
by using the 

NOSE UP/DN

 wheel.  The vertical speed reference can also be adjusted 

by pressing the 

CWS

 button, hand-flying the aircraft to establish a new vertical speed, 

and then releasing the 

CWS

 button.  If the Selected Altitude Capture mode is available 

in this aircraft, this mode may be used for climb or descent to the Selected Altitude 
since Selected Altitude Capture mode is automatically armed when Vertical Speed 
mode is selected.

Содержание GFC 600















































































Отзывы: