Garmin GDL 69 Скачать руководство пользователя | Manualshive

Страница: 15 / 70

background image

General Description

GDL 69/69A Installation Manual

Page 1-7

190-00355-02

Revision E

1.9 Reference

Documents

The following publications are sources of additional information for installing the GDL 69/69A. Before
installing the GDL 69/69A, the technician should read all referenced materials applicable to the
installation along with this manual.

Table 1-8. Referenced Publications

Manufacturer Part

Number

Document

Garmin

190-00149-01

GMA 340 Audio Panel Installation Manual

Garmin

190-00303-20

GMA 1347 Audio Panel Installation Manual

Garmin

190-00181-02

500 Series Installation Manual

Garmin

190-00140-02

400 Series Installation Manual

Garmin

190-00140-13

400/500 Series Garmin Optional Displays

Garmin

190-00303-01

GDU 1040 Installation Manual

Garmin

190-00522-01

GA 55A, GA 56A and GA 57 Antenna Installation Manual

Garmin

190-00355-04

XM™ Satellite Radio Activation Instructions

Garmin AT

560-1025-( )

MX20 Installation Manual

Garmin AT

560-0979-( )

SL15 Audio Panel Installation Manual

Garmin AT

560-0978-( )

SL10 Audio Panel Installation Manual

1.10 Certification

The GDL 69 and GDL 69A XM Satellite Radios and the XM Satellite Radio Antenna have Parts
Manufacturing Approval (PMA) for the aircraft listed on the STC Approved Mode List (AML).

1.10.1 TSO/JTSO Compliance

The GA 57 is TSO-C144 authorized. There are no other applicable TSO standards.

1.10.2 Other Regulatory Criteria

The GDL 69/69A and GA 55 and GA 55A are PMA authorized.

1.11 Unpacking Unit

Carefully unpack the equipment and make a visual inspection of the unit for evidence of damage incurred
during shipment. If the unit is damaged, notify the carrier and file a claim. To justify a claim, save the
original shipping container and all packing materials. Do not return the unit to Garmin until the carrier
has authorized the claim.

Retain the original shipping containers for return shipments. If the original containers are not available, a
separate cardboard container should be prepared that is large enough to accommodate sufficient packing
material to prevent movement.

1.12 Warranty Statement

Limited Warranty

This Garmin product is warranted to be free from defects in materials or workmanship for two years from
the date of purchase. Within this period, Garmin will at its sole option, repair or replace any components
that fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts or
labor, provided that the customer shall be responsible for any transportation cost. This warranty does not
cover failures due to abuse, misuse, accident or unauthorized alteration or repairs.

THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF
ALL OTHER WARRANTIES EXPRESS OR IMPLIED OR STATUTORY, INCLUDING ANY
LIABILITY ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, STATUTORY OR OTHERWISE. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM STATE TO STATE.

«
...
13
14
15
16
17
...
»

Содержание GDL 69







































































Отзывы:

Нет отзывов

Похожие инструкции для GDL 69

Бренд: Sanyo Страницы: 30

Бренд: 3M Страницы: 727

Бренд: Garmin Страницы: 56

Signage Solutions BDL4250EL

Бренд: Philips Страницы: 41

Signage Solutions BDL4250EL

Бренд: Philips Страницы: 3

Бренд: Omcan Страницы: 20

Бренд: RAMTONS Страницы: 3

Бренд: Garmin Страницы: 2

Бренд: Garmin Страницы: 86

Бренд: Garmin Страницы: 141

Бренд: Propeller Страницы: 20

Бренд: Hill Phoenix Страницы: 32

Бренд: Hill Phoenix Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды